Official Snapper Lawn Mower Hardware

Nut-flglk 5/16-18

$6.15

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Nut-flglk

$6.15

Fix Number: FIX9299574
Manufacturer Part Number: 712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Screw-carriage 5/1

$7.06

Fix Number: FIX9298717
Manufacturer Part Number: 710-04998

This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct repair procedure. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the screw and keeps it from turning when the nut is tightened. This screw is made of high-quality metal and is sold individually. A wrench might be needed to replace this hardware.

Washer, Thrust

$5.69

Fix Number: FIX9070364
Manufacturer Part Number: 7014523YP

This thrust washer is an authentic item which is supplied by the original manufacturer for Murray and Snapper lawn mowers. It is a special type of washer that will resist torque applied by the bearing while ensuring a tight fit. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This thrust washer is made of a durable material and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and application.

Screw-hex Tap 1/4

$6.93

Fix Number: FIX9087241
Manufacturer Part Number: 710-0895

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

Lawn Mower Flange Lock Nut

$5.46

Fix Number: FIX9299591
Manufacturer Part Number: 712-04217

It is an authentic OEM sourced item which is specially produced for use with lawn mowers made by MTD, Bolens, Yard Man, Yard Machines, Troy-Bilt, and Cub Cadet. The flange lock nut attaches to the rear wheel. It may require a socket set during installation and will need to be replaced if it becomes broken. This item is priced individually and is made out of metal.

Nut-square 1/4-20

$5.68

Fix Number: FIX9093635
Manufacturer Part Number: 712-04222

It is an authentic high quality piece of hardware commonly utilized on walk behind lawn mowers. This nut is supplied directly from original equipment manufacturer. It is generally used to secure the trail shield. Please note, this metal square nut is sold individually.

Lawn Mower Spindle Blade Washer

$10.42

Fix Number: FIX9266914
Manufacturer Part Number: 1731917SM

This item is sourced from the original manufacturer and is intended to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle assembly. This item will require a hex wrench or ratchet to install and is priced as a single item.

Lawn Mower Hex Head Washer Screw

$5.36

Fix Number: FIX8943581
Manufacturer Part Number: 2828635SM

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

Snow Blower Shear Pin

$5.16

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Snapper Lawn Mower Hardware

Popular Snapper Lawn Mower Hardware

Related Snapper Lawn Mower Parts

Snapper Lawn Mower Hardware

Start With Your Model Number

Popular Snapper Lawn Mower Hardware

Related Snapper Lawn Mower Parts