OEM Jonsered Lawn Mower Parts & Accessories

Lawn Mower Flangelock Hex Nut

$6.55

Fix Number: FIX9022497
Manufacturer Part Number: 532409149

This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. For this repair you will need a wrench set.

Lawn Mower Wheel

$13.15

Fix Number: FIX12630280
Manufacturer Part Number: 589527301

This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly and helps support the deck while providing traction, preventing it from making direct contact with the ground during operation. This helps maintain an even cut and protects both the deck and the lawn. The gauge wheel is sold individually, so be sure to check your model’s specifications to determine the quantity needed.

Lawn Mower Idler Pulley

$26.35

Fix Number: FIX11824875
Manufacturer Part Number: 587969201

This idler pulley is sold independently and includes the pre-installed bearings. It is an exact OEM replacement part for the original. This part is found in walk-behind lawn mowers to supply tension to the drive belt, allowing the belt to turn. For this repair you may require a wrench set to remove the worn idler pulley.

Shoulder Bolt

$6.55

Fix Number: FIX17089372
Manufacturer Part Number: 596434404

This is a genuine Husqvarna replacement part sourced directly from original equipment manufacturer for use with lawn mowers/tractors. It is commonly used in riding mowers to keep the gauge wheel in place. This is a hex head bolt which requires a wrench for installation. It is sold individually.

Watch the install video

Lawn Mower Deflector

$17.55

Fix Number: FIX9287363
Manufacturer Part Number: 532426129

This is a single black plastic clipping deflector, also sometimes referred to as a discharge chute, for a lawn mower. This part attaches to the mulcher door on the side of the lawnmower deck. It is responsible for directing the cut grass clippings out of the side of the mower. Please note that this is the deflector only and does not include the hinge bracket assembly or hinge rod, which may also be needed. If this part is missing or damaged, it is important to replace it, as it can be dangerous to have debris being removed from the lawn mower in an uncontrolled manner.

Lawn Mower Mandrel Assembly

$73.55

★★★★★

1 Review

Fix Number: FIX12116539
Manufacturer Part Number: 587820301

This mandrel assembly is for lawn tractors. Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Wear work gloves to protect your hands when installing this part.

Bolt and Washer Assembly

$12.05

Fix Number: FIX9020856
Manufacturer Part Number: 532193003

This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If your lawnmower blade is not rotating properly or making grinding sounds, these are usually the first signs that that the bolt and washer may be worn. For this beginner repair, start by making sure the engine is cool, the spark plug is removed, and the mower is on its side. Remove the old bolt and washer with a socket. Insert the new bolt and washer into the blade opening and secure it with the socket.

Lawn Mower Mandrel Spacer Washer

$7.52

Fix Number: FIX9286886
Manufacturer Part Number: 532187690

This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are approximate). In general, washers help to spread load, can provide insulation such as electrical, and can also help to prevent galvanic corrosion.

Solenoid

$34.27

Fix Number: FIX16372182
Manufacturer Part Number: 582042802

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair. Check the diagrams of your model for the exact location and the correct installation of the new part.

Fixes these symptoms

Will Not Start
See more...

Lawn Mower Blade Mower Hi Lift

$34.27

★★★★★

1 Review

Fix Number: FIX9017804
Manufacturer Part Number: 532405380

This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches wide. This blade is a high-lift blade (2-in-1 blade), meaning it is designed with curved tips that lift grass clippings up and out through the discharge chute into a grass bag (if applicable). By replacing a dull, bent, or damaged blade, this will ensure a better quality cut. For this repair, you will need a wrench to remove the blade bolt, and we recommend wearing gloves to protect your hands.

Jonsered Lawn Mower Parts

Popular Jonsered Lawn Mower Parts

Jonsered Lawn Mower Appliance Types

Related Jonsered Lawn Mower Parts

Popular Jonsered Lawn Mower Models

Jonsered Lawn Mower Parts

Start With Your Model Number

Popular Jonsered Lawn Mower Parts

Jonsered Lawn Mower Appliance Types

Related Jonsered Lawn Mower Parts

Popular Jonsered Lawn Mower Models