Husqvarna Lawn Mower Hardware

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Husqvarna Appliance Parts
Shop By Part Type

Popular Husqvarna Lawn Mower Hardware

Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
$3.99
On Order
Fix Number
FIX9143890
Manufacturer Part Number
812000029
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.
Washer Head Screw – Part Number: 584953901
Washer Head Screw
$3.99
In Stock
Fix Number
FIX9982804
Manufacturer Part Number
584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is damaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
$8.71
In Stock
Fix Number
FIX9020856
Manufacturer Part Number
532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
$3.99
On Order
Fix Number
FIX9008998
Manufacturer Part Number
532121749
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to spread the load under a bolt or screw. It also helps to reduce heat and friction as the fastener is tightened. This repair may require a screwdriver or socket wrench, depending on the fastener for your model. This is a single flat washer; the fasteners are sold separately.
Nut, Hex, Flangelock – Part Number: 532409149
Nut, Hex, Flangelock
$4.99
In Stock
Fix Number
FIX9022497
Manufacturer Part Number
532409149
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. For this repair you will need a wrench set.
Washer Hardened – Part Number: 532188967
Washer Hardened
$4.99
On Order
Fix Number
FIX9015920
Manufacturer Part Number
532188967
Washer-Spacer – Part Number: 532187690
Washer-Spacer
$3.99
In Stock
Fix Number
FIX9286886
Manufacturer Part Number
532187690
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are approximate). In general, washers help to spread load, can provide insulation such as electrical, and can also help to prevent galvanic corrosion.
Pin Cotter 5/16 Bow Tie Lock – Part Number: 532194208
Pin Cotter 5/16 Bow Tie Lock
$3.99
On Order
Fix Number
FIX9016072
Manufacturer Part Number
532194208
This is a 5/16-inch metal cotter pin and it is sold as an individual part. Cotter pins secure a variety of different assemblies by placing them through a drilled hole in a shaft or bolt, such as on a wheel on a lawn tractor. If your cotter pin is missing or damaged this authentic OEM part is designed to replace the original.
Nut-Push – Part Number: 532110452
Nut-Push
$3.99
On Order
Fix Number
FIX9285696
Manufacturer Part Number
532110452
Pin Cotter 7/16 Bow Tie Lock – Part Number: 532194209
Pin Cotter 7/16 Bow Tie Lock
$3.99
On Order
Fix Number
FIX9020881
Manufacturer Part Number
532194209
This is an OEM bowtie cotter pin for lawn tractors. It is sold individually. This part is made of metal material, so over time, this metal can corrode or rust, especially if the lawn tractor is exposed to elements on a regular basis. It should be checked regularly and replaced every so often. Before you begin this repair, the ignition switch needs to be turned off, the key removed, the mower deck should be in the lowest position, and the clutch actuator lever needs to be off. When installing the new pin, make sure the washer is in place before sliding the pin into position. This repair should only take a few minutes.

Related Husqvarna Lawn Mower Parts