Start With Your Model Number
Popular Engine Hardware
Fuel Line Grommet
Fix Number FIX8859978
Manufacturer Part Number 13211546730This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.
Fix Number FIX9995391
Manufacturer Part Number 6697846This is a return grommet for your lawn and garden equipment. This part creates an airtight seal to prevent fuel leaking from your machine. We recommend installing both the grommet and the return fuel line together. Place the return fuel line inside the grommet and install both into the fuel tank.
Fix Number FIX10053748
Manufacturer Part Number V490001230This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
Fuel Line Clamp
Fix Number FIX8938782
Manufacturer Part Number 26460This and an authentic OEM replacement part sourced directly from the manufacturer. Fuel line clamps are used in small engines such as snow blowers, lawn mowers, tillers, and lawn tractors. Fuel line clamps are in place to ensure the fuel line is securely attached to the carburetor. It is important that your fuel line clamps are functioning properly; having a secure fuel line prevents fuel leaks in your engine. This part is made of metal. You will require pliers to install and secure tube clips.
Fix Number FIX9148697
Manufacturer Part Number 90050000005This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.