Official Craftsman Engine Hardware

Washer Head Screw

$6.51

Fix Number: FIX9982804
Manufacturer Part Number: 584953901

This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missing altogether. It is sold individually and is made of metal. You will need a wrench to remove the old screw and tighten the new one.

Shoulder Bolt

$6.51

Fix Number: FIX17089372
Manufacturer Part Number: 596434404

This is a genuine Husqvarna replacement part sourced directly from original equipment manufacturer for use with lawn mowers/tractors. It is commonly used in riding mowers to keep the gauge wheel in place. This is a hex head bolt which requires a wrench for installation. It is sold individually.

Lawn Mower Mandrel Spacer Washer

$7.16

Fix Number: FIX9286886
Manufacturer Part Number: 532187690

This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are approximate). In general, washers help to spread load, can provide insulation such as electrical, and can also help to prevent galvanic corrosion.

Bolt and Washer Assembly

$13.02

Fix Number: FIX9020856
Manufacturer Part Number: 532193003

This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If your lawnmower blade is not rotating properly or making grinding sounds, these are usually the first signs that that the bolt and washer may be worn. For this beginner repair, start by making sure the engine is cool, the spark plug is removed, and the mower is on its side. Remove the old bolt and washer with a socket. Insert the new bolt and washer into the blade opening and secure it with the socket.

Lawn Mower Push Nut

$6.51

Fix Number: FIX9285696
Manufacturer Part Number: 532110452

This is a genuine Craftsman replacement part for use in lawn tractors. It helps to connect the deflector rod to the deflector shield. The metal push nut is a small part and will need to be replaced if it becomes lost or broken. A screwdriver and a set of pliers may be needed to replace this part. This item is sold individually.

Pin-bow Tie Cotter

$6.51

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Auger will not turn
See more...

Flange Top Lock Nut

$6.51

Fix Number: FIX16381821
Manufacturer Part Number: 596134801

This high-quality item is an authentic OEM hardware that is designed for use with Craftsman riding lawn mowers and garden tractors. It is one of the locknuts that is utilized to secure the pulleys. A locknut is a nut that resists loosening under vibration and torque. Refer to the diagrams of your model for the exact location and the correct application of this part. One durable metal locknut is included. You will need a wrench to secure and remove it.

Washer 5/16 Std Flt

$6.51

Fix Number: FIX16381824
Manufacturer Part Number: 596134901

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

Lawn Mower Screw

$6.51

Fix Number: FIX9009676
Manufacturer Part Number: 532137729

This is a single OEM replacement screw for a lawn mower. This flanged hex head screw measures 1/4-20 by 5/8. It is used in various applications, so we recommend checking the diagram related to your model for its exact location.

Nut Lock

$6.51

Fix Number: FIX16381792
Manufacturer Part Number: 596040501

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

Craftsman Engine Hardware

Popular Craftsman Engine Hardware

Related Craftsman Engine Parts

Craftsman Engine Hardware

Start With Your Model Number

Popular Craftsman Engine Hardware

Related Craftsman Engine Parts