OEM Yard Man Edger Parts & Accessories

Edger Blade

$11.25

Fix Number: FIX9129938
Manufacturer Part Number: 781-0080-0637

This edger blade is an OEM part direct from Craftsman for edgers. This part connects to the drive shaft to edge and cut grass. It is recommended to review your models diagram to verify the parts compatibility. You will need a wrench to replace this part. This edger blade is made of metal and sold individually.

Snow Blower Star Knob

$10.02

Fix Number: FIX9109078
Manufacturer Part Number: 720-04072A

This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve your problem. No tools are required for this repair. For installation instructions and more information on the part, refer to the manual provided by the manufacturer. This knob is secured with a carriage bolt, which is sold separately. *Please note: this knob is sold separately as well.

Trimmer Flat Washer 3/8N I.D.

$6.51

Fix Number: FIX9109281
Manufacturer Part Number: 736-0262

Designed for various uses in select outdoor power equipment, this flat washer helps spread the load of a bolt or nut across the connected surface, the washer has an inner diameter of 0.385 of an inch, an outer diameter of 0.870 of an inch, and a thickness of 0.090 of an inch. This is a single washer that you should verify is compatible with the equipment you are repairing before purchase. It can be helpful to have multiple of this part on hand.

Edger Belt Guard

$25.25

Fix Number: FIX9131333
Manufacturer Part Number: 781-0427-0637

Lawn Mower Bearing

$30.71

Fix Number: FIX9491339
Manufacturer Part Number: 941-0524A

This sealed ball bearing is used in mower deck spindle and pulley assemblies to reduce friction and support smooth rotation. Designed to fit securely in the housing, it helps extend component life and maintain consistent cutting performance. It’s a direct replacement for worn or noisy bearings during deck or pulley service.

Edger Torsion Spring

$16.45

Fix Number: FIX9301385
Manufacturer Part Number: 732-0188A

This is an authentic OEM sourced replacement part which is specially designed for lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality torsion spring is made of durable metal and is sold individually.

Bearing

$29.65

Fix Number: FIX9167498
Manufacturer Part Number: 941-0155

This authentic OEM sourced replacement part is designed for MTD lawn and garden equipment. Ball bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality bearing is made of durable metal and is sold individually.

Rod-adjust

$21.95

★★★★★

1 Review

Fix Number: FIX10007704
Manufacturer Part Number: 747-04110A

This is a Manufacturer Approved replacement part designed for Trimmers/Edgers. This blade adjustment rod is made out of Metal and it is Sold Individually. Blade adjustment rod lets you adjust the position of the blade for bevel cutting. When replacing this Rod you will need Pliers, Socket set, Wrench Set.

Lawn Mower Ground Drive Belt

$30.75

★★★★★

1 Review

Fix Number: FIX9172714
Manufacturer Part Number: 954-04032B

This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.

Bolt-hex

$7.12

Fix Number: FIX9091427
Manufacturer Part Number: 710-3180

The metal screw attaches to the block steering. It is a genuine OEM sourced part which is specially designed for use with chippers, shredders, edgers, lawn tractors, and snowblowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man. This item is available as an individual replacement. A wrench will be necessary during the installation of this part. It will need to be replaced if it becomes stripped or broken.

Yard Man Edger Parts

Popular Yard Man Edger Parts

Yard Man Edger Appliance Types

Popular Yard Man Edger Models

Yard Man Edger Parts

Start With Your Model Number

Popular Yard Man Edger Parts

Yard Man Edger Appliance Types

Popular Yard Man Edger Models