Edger Hoses and Tubes

Fuel Return Tube 3x6x90mm This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has primed the carburetor to start. Depending on usage, this part will weaken and crack, that is when you will need to replace it.

Fuel Line (25" Length) The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part can become weak and crack over time due to its constant contact with fuel, in which case will need to be replaced. It is sold separately and is an OEM quality replacement part.

Pipe Fuel Assembly This is a pipe fuel assembly for a variety of lawn and garden equipment. This pipe is also known as a fuel line, and it is 160mm long by 5mm wide. This part feeds the carburetor with fuel by connecting it to the fuel filter inside of the fuel tank. Before making this installation, we recommend draining the fuel from your machine, and removing the spark plug.

Hose This is a hose for your lawn and garden equipment. It is just over 4 inches long, and made of a strong, and durable plastic. The hose is connected to the air purge bulb and the carburetor, and may be called a fuel hose. If you use your machine often, this part will deteriorate and crack, allowing fuel to leak out. If your line is damaged it should be replaced right away. This hose could also be used as the return fuel line.

Hose

Pipe-Return-3x6x70mm

Pipe-Return-3x6x75mm

Joint

Kit-Fuel Line

Tube