Troy-Bilt Chipper Shredder Parts

Troy-Bilt Appliance Parts

Popular Troy-Bilt Chipper Shredder Parts

KIT-WHEEL DRIVE 8
$64.97
On Order
Fix Number
FIX19283937
Manufacturer Part Number
753-08087
This wheel kit is a genuine manufacturer sourced replacement part. It is specially designed for use with walk-behind lawn mowers. This is the drive wheel that moves the mower. This part consists of a plastic tire and a plastic rim. Includes one (1) wheel per order. To replace this part you would need a wrench. • Remove the wheel cover • This will allow you to remove the bolt • Remove old wheel and secure the new one in place • Reassemble and test the unit
Washer-lock 5/16
$6.69
In Stock
Fix Number
FIX9311087
Manufacturer Part Number
936-0119
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.
KIT- WHL IDLE 8 X
$67.61
Special Order
Fix Number
FIX19283939
Manufacturer Part Number
753-08091
8 x 2.125 This wheel is for lawn mowers. Wear work gloves to protect your hands when installing this part.
Lawn Mower Ground Drive Belt
$33.11
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9172714
Manufacturer Part Number
954-04032B
This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.
Chipper / Shredder Flail Blade
$29.80
In Stock
Fix Number
FIX9098575
Manufacturer Part Number
719-04308
This is an original part from the MTD manufacturer. The flail blade is constructed of durable metal, and is compatible with chipper/shredder devices. This part is secured onto the impeller assembly, and has been designed to shred or cut lawn and garden debris. This part is sold individually. A hex key and a wrench are helpful in the removal and replacement.
WHEEL ASM-DRIVE 8
$60.40
Special Order
Fix Number
FIX19251172
Manufacturer Part Number
634-05039
This is a genuine manufacturer-approved replacement wheel which is specially designed for use with Troy-Bilt lawn mowers. It is the front wheel that supports the unit, please note the rear wheels and the hardware to secure the parts are all sold separately. This durable wheel is made of high-quality plastic and it is sold individually.
WHEEL ASM-INT DR 8
$46.65
Special Order
Fix Number
FIX19251328
Manufacturer Part Number
634-05281A
WHEEL-GEAR 8-INCH INTE
$30.64
On Order
★★★★★
★★★★★
2 Reviews
Fix Number
FIX19272260
Manufacturer Part Number
734-04018C
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside which is driven by the Right hand and Left hand smaller gear that attaches to the front axle on the transmission assembly.
Wsh, Bell., .34 x .872 x .06
$6.85
In Stock
Fix Number
FIX9118681
Manufacturer Part Number
736-0242
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.
Fix Number
FIX9088770
Manufacturer Part Number
710-1260A

Troy-Bilt Chipper Shredder Appliance Types

Related Troy-Bilt Chipper Shredder Parts

Popular Troy-Bilt Chipper Shredder Models