MTD Chipper Shredder Parts

MTD Appliance Parts

Popular MTD Chipper Shredder Parts

PIN-SHOULDER
$7.68
Special Order
Fix Number
FIX19273615
Manufacturer Part Number
738-04286A
This is an authentic replacement part manufactured for use with shredders and chippers. The metal shoulder pin is used to fasten the flail blades, and to provide a pivot point for the flail blades. The shoulder pin is sold individually.
Wsh, Bell., .34 x .872 x .06
$6.58
In Stock
Fix Number
FIX9118681
Manufacturer Part Number
736-0242
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.
Washer-lock 5/16
$6.42
In Stock
Fix Number
FIX9311087
Manufacturer Part Number
936-0119
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.
Fix Number
FIX9088770
Manufacturer Part Number
710-1260A
Lawn Mower Plastic Flange Bearing
$10.30
In Stock
Fix Number
FIX9302372
Manufacturer Part Number
741-0487C
This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rotate. It has an inner diameter of 0.6 inches. This part is most commonly used on a shaft to allow the shaft to spin inside the cylinder.
Blade-flail
$44.39
In Stock
Fix Number
FIX9096396
Manufacturer Part Number
719-0329
The flail blade attaches to the impeller assembly. This is an OEM part sourced directly from the manufacturer and used in chippers made by MTD, Troy-Bilt, Yard Machines, and Cub Cadet. It is available as an individual replacement part even though two may be needed. This part may require a socket set, a wrench set, and a hammer during installation. It is made of metal and will need to be replaced if it breaks or cracks.
Hex L-Nut
$6.25
In Stock
Fix Number
FIX9406571
Manufacturer Part Number
712-0429
This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard hardware which has multiple uses based on equipment. Please refer to appropriate diagrams for correct use/application of it. Please note you would need a wrench when working with this left hand threaded nut.
Cap-push
$15.95
In Stock
Fix Number
FIX9300605
Manufacturer Part Number
726-0214
It is an authentic manufacturer-supplied replacement item which is specially designed for use with a variety of lawn and garden equipment. This special push cap is generally secured on the end of a shaft to protect a user from a sharp metal edge, please make sure to check appropriate diagrams of your model for correct location and use of this hardware. It is a high-quality component which is made of durable black plastic material and it is sold individually.
Chipper / Shredder Flail Blade
$28.62
In Stock
Fix Number
FIX9098575
Manufacturer Part Number
719-04308
This is an original part from the MTD manufacturer. The flail blade is constructed of durable metal, and is compatible with chipper/shredder devices. This part is secured onto the impeller assembly, and has been designed to shred or cut lawn and garden debris. This part is sold individually. A hex key and a wrench are helpful in the removal and replacement.
Lawn Mower Ground Drive Belt
$31.80
In Stock
Fix Number
FIX9172714
Manufacturer Part Number
954-04032B
This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.

MTD Chipper Shredder Appliance Types

Related MTD Chipper Shredder Parts

Popular MTD Chipper Shredder Models