Chipper Shredder Engines

Fix Number

FIX9177819

Manufacturer Part Number

A101000000

This piston ring is an authentic manufacturer approved replacement part. Is is commonly used on Echo gas trimmers/edgers. The purpose of a piston ring is to create an air tight seal inside the cylinder. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase. This would cause low compression and a loss of power. Replacing an o-ring should resolve this issue. This part is made out of metal and is sold individually. To complete this repair you will need a set of wrenches, pliers and a screwdriver. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring • Reassemble and test the equipment

Fix Number

FIX9321825

Manufacturer Part Number

P021007712

This is a genuine OEM sourced replacement part that has been sourced from the original manufacturer to be used with trimmers, hedge clippers, pruners, edgers, and blowers. The piston fits inside the cylinder and links with the connecting rod. The piston is used to separate the combustion chamber and the crankcase. The piston moves up and down inside the cylinder during the ignition sequence and this action drives the crankshaft. This kit includes the piston, ring, clips, and pin.

Fix Number

FIX9180838

Manufacturer Part Number

A101000140

The purpose of a piston ring is to create an air tight seal inside the cylinder. This piston ring is an authentic manufacturer approved replacement part that is specially designed for use with Echo backpack blowers. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, this would cause low compression and a loss of power. Replacing the piston ring should resolve this issue. This part is made from durable metal and is sold individually.

Fix Number

FIX9148750

Manufacturer Part Number

790848

This is an authentic OEM part. The Toro air vane is designed for use with many lawn mower engines. This plastic item pulls the choke open when the flywheel fan sends airflow from the air vane. You will need a wrench and a screwdriver for the installation. The air vane is sold individually.

Fix Number

FIX9294554

Manufacturer Part Number

690977

The valve tappet attaches to the push rod. It is made out of metal and is sold individually. This is a Briggs & Stratton and Toro replacement part directly sourced from the manufacturer for use in engines. It may require a set of pliers during installation. This part may become broken and will need to be replaced.

Fix Number

FIX8964200

Manufacturer Part Number

40006

Fix Number

FIX9136854

Manufacturer Part Number

791787

This is an authentic OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of these ring is to provide a tight seal between walls of the cylinder and the piston. A worn or broken piston ring will allow combustion gasses to escape the seal and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Please note this high-quality set is includes four durable metal rings.

Fix Number

FIX9306685

Manufacturer Part Number

791969

The standard ring set is sold as a set that contains all the necessary rings. They are part of the piston assembly and are made out of metal. These are authentic Briggs & Stratton and Toro replacement parts that are sourced from the original manufacturer for use with engines and lawn mowers. A set of pliers may be needed during the replacement of these items. Over time they may bend or break and will need to be replaced.

Fix Number

FIX9075686

Manufacturer Part Number

693578

Fix Number

FIX9152745

Manufacturer Part Number

798813

This is a genuine OEM sourced replacement part that is intended to be used with small engines from Briggs & Stratton and blower/vacs from Toro. The metal connecting rod is used to link the piston and the crankshaft assembly. This item is sold as an individual replacement part.