Bear Cat Chipper Shredder Parts

Bear Cat Appliance Parts

Popular Bear Cat Chipper Shredder Parts

Springbrake
$14.05
In Stock
Fix Number
FIX9908756
Manufacturer Part Number
17692
This is a genuine OEM replacement part sourced directly from Bear Cat. When this spring is engaged the motor still runs but the blade stops spinning. This is a safety feature that enables you to move your equipment safely while you are operating it. Over time springs can lose tension, or they can break, it is important to replace this part when it is no longer functioning properly. This spring is commonly used in stump grinders. The spring is made of metal, and it is sold individually.
Pushnut, 5/8 In
$6.25
In Stock
Fix Number
FIX9895389
Manufacturer Part Number
15406
The pushnut attaches to the wheel assembly. This part is made out of metal and is available individually. It might require a hammer to replace this item if it becomes broken. This is an original Bear Cat part for use in chippers, shredders, and trimmers.
Bearing, 1 In. Flushmount
$62.56
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12005135
Manufacturer Part Number
16234B
This is a genuine part from the original manufacturer. It fits various models of Bear Cat chippers and shredders.
Belt, 29" C/s
$60.33
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9897374
Manufacturer Part Number
16043
This belt (29" & #34; c/s) is an OEM direct from Bear Cat. The chipper/shredder belt is made of a rubber composite, and is sold individually. Fastened to the engine and sheave, the belt transmits force to related components. A screwdriver and a wrench are necessary for the replacement. It is recommended to purchase a spare as belts can wear out over time and regular use.
Kit, Chipper Blade
$178.03
In Stock
Fix Number
FIX10004606
Manufacturer Part Number
72493
Belt, 29.1 Matched Set
$60.94
In Stock
Fix Number
FIX9909613
Manufacturer Part Number
17996
This is an authentic replacement part manufactured for use with Bear Cat chipper/shredders. The special belt is used to link the motor drive shaft and the belt drives the rotor assembly. These belts are sold as a kit of two and the kits are sold individually.

Installation Instructions

siarle from BAINBRIDGE IS, WA
Belt
1. remove belt covers top & bottem
2. Install belt
3. Install & adjust restraint so belt frees without coming off wheels when tension is released.
4. replace covers. especially bottem
Primary difficulty is access for any needed adjustments (With covers removed of course)
Read more...
Knife, Rect. Shredder
$48.75
In Stock
Fix Number
FIX10001179
Manufacturer Part Number
70856
The shredder knife goes next to the knife shaft. This high-quality part is made of metal and is sold individually, but keep in mind that many may be required. The knife is an OEM from Bear Cat for chippers and shredders. It can become dull or broken and will need to be replaced and a wrench may be needed during the replacement process.
Kit, Two Edge Blade
$115.53
In Stock
Fix Number
FIX10000994
Manufacturer Part Number
70738
This is a genuine Bear Cat replacement part. The edge blade kit is designed by the manufacturer for use in a chipper/shredder. This kit includes two metal blades, four metal washers, and eight metal screws for attachment. You will require a wrench when replacing these items.
Cap, Rotor Shaft End
$14.42
Special Order
Fix Number
FIX10001112
Manufacturer Part Number
70760
Blade, Tool Steel Chipper
$68.94
In Stock
Fix Number
FIX10000999
Manufacturer Part Number
70739
This item has been sourced from the original manufacturer and is intended to be used with chipper/shredders from Bear Cat. The metal chipper blade attaches to the large rotor weldment and is used to cut and chip at the material being fed through the machine. This item is sold as an individual replacement part.

Bear Cat Chipper Shredder Appliance Types

Popular Bear Cat Chipper Shredder Models