Kohler Parts

Fix Number

FIX9883867

Manufacturer Part Number

1204101-S

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor, insulator, and heat shield. It is recommended to replace the gaskets when servicing the engine to make proper seals and connections when the parts are reassembled. This item is available as an individual replacement part.

Fix Number

FIX16285816

Manufacturer Part Number

1413211-S

This replacement spark plug is an authentic OEM item which is designed for use with Kohler engines commonly installed on lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. After some time spark plugs can become dirty or fouled. It is a good idea to replace the spark plug once this happens to ensure your engine runs properly. This high-quality item is sold individually. Note, you should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a properly sized socket wrench to remove the old and install the new spark plug.

Fix Number

FIX9926357

Manufacturer Part Number

2403219-S

This item has been OEM sourced to ensure quality. The oil seal is intended to be used with small engines from Kohler. The oil seal is used to secure the crankshaft and to prevent oil from leaking between the shaft and the crankcase. This item is priced as an individual part.

Fix Number

FIX9927948

Manufacturer Part Number

2441105-S

This replacement push rod is specially designed for Kohler engines commonly installed on a variety of lawn and garden equipment. It is an authentic high-quality item that is sourced from the original equipment manufacturer. The rod is attached to the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not only affect your engine\\\'s performance, but it can also seriously damage other parts if the problem is not taken care of immediately. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. It is made of durable metal and is sold individually. You will need a screwdriver and a wrench set to take the engine apart in order to perform this repair.

Fix Number

FIX9929713

Manufacturer Part Number

2515811-S

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your model for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

Fix Number

FIX9928679

Manufacturer Part Number

2484104-S

This authentic manufacturer-sourced gasket kit is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The parts in this kit are utilized to ensure a tight fit between the cylinder and the cylinder head. Over time gaskets may wear out and begin to crack eventually requiring replacements. For the exact locations and the correct installation of the new components, please refer to the appropriate diagrams of your model. This high-quality kit includes the head gasket, the intake port o-rings, the muffler gaskets, the intake manifold gaskets, the head bolt washers, the head bolt nuts and the installation instructions. You will need a wrench set to take the engine apart when performing this repair.

Fix Number

FIX9930053

Manufacturer Part Number

2535111-S

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can seriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

Fix Number

FIX9965179

Manufacturer Part Number

5205002-S

This is a genuinely sourced oil filter for a small engine, sold individually. The oil filter should be replaced every other oil change as part of your regular maintenance. Keeping the oil filter well-maintained will ensure your small engine is running efficiently and contaminants are being filtered from the oil. For this repair, drain the oil from the crankcase, allow the oil filter to drain, remove the old filter and wipe the filter adapter gasket area. Pour new oil into the oil filter. Apply a small amount of clean oil to the rubber gasket on the new filter. The filter is now ready to be installed onto the engine. Turn it clockwise until the rubber gasket makes contact with the filter adapter, and then tighten it 2/3 to one full turn to fully secure it. You can now reinstall the drain plug and fill the crankcase with new oil.

Fix Number

FIX9927882

Manufacturer Part Number

2439316-S

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other damage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

Fix Number

FIX9884824

Manufacturer Part Number

1213202-S

This is a Genuine OEM sourced replacement part used on a variety of Kohler Engines. A spark plug is used to deliver electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You would need a Spark Plug Wrench (or Socket) to loosen/secure the Spark Plug.