Karcher Parts

Fix Number

FIX9984415

Manufacturer Part Number

6.365-394.0

This is a grooved ring, installed on the pump piston. It is sold individually and sourced right from the original manufacturer, ensuring the proper fit for your pressure washer. The function of this part is to be a seal to prevent the oil in the reservoir and the water in the pump from contaminating each other. The groove ring is known to wear over the use of your equipment and this can cause a decrease in pressure and water leakage.

Fix Number

FIX9949583

Manufacturer Part Number

4.580-330.0

This part includes one pump check valve for use with pressure washers. The pump check valve and the piston regulate the flow of water through the pump assembly. It is common for the part to wear out over time, so it should be part of your regular inspection check-list. If you use your pressure washer quite a bit, we recommend having one of these on hand in your tool box.

Fix Number

FIX9960774

Manufacturer Part Number

5.332-391.0

This is a high-quality pressure spring that is made for use with Karcher pressure washers. It is an authentic item that is supplied from the original manufacturer. The spring applies tension on the piston that helps to create pressure inside the cylinder. Over time it may wear out, get damaged or lost eventually requiring a replacement to maintain your pump. Refer to the owners manual and the diagrams of your model for the correct installation. Note, this pressure spring is made of durable metal and is sold as an individual item. To perform this repair you will need a screwdriver and a wrench set. Remove the cover and the cylinder head to gain access to the pressure spring.

Fix Number

FIX9960693

Manufacturer Part Number

5.115-721.0

This is a Genuine OEM Authorized replacement part used on Karcher Pressure Washers. This part is made out of Rubber Material and it is Sold Individually. This Washer fits on top of Grooved Ring and provides a seal. You would need a Set of Wrenches and Screwdriver to get take off the Cover and take apart the Pump.

Fix Number

FIX10020937

Manufacturer Part Number

9.155-013.0

This is a Genuine Manufacturer Sourced replacement part used on Karcher Pressure Washers. This item is made out of Metal and it is Sold Individually. This Female Garden Hose Connector in conjunction with Male Adapter is used to attach Garden Hose to Pressure Washers Pump. Requires a Wrench to secure.

Fix Number

FIX9984335

Manufacturer Part Number

6.362-471.0

It is an OEM item which is made for Karcher pressure washers. This component provides an air-tight seal for the pump housing. Over time the material will wear out and it may begin to crack eventually requiring a replacement to prevent leaks. To ensure the correct installation of the new gasket, refer to the appropriate diagrams of your specific model. Note, it is made of a durable material and is sold as an individual component. You will need a socket set to take the pump housing apart in order to perform this repair.

Fix Number

FIX10020967

Manufacturer Part Number

9.181-005.0

Genuine Karcher replacement part, this item is sold individually. The purpose of the 9.181-005.0 Filter Seal Hose Connector is to act as a seal to keep water from leaking out of the hose connection. It also will keep debris from entering the pump and causing it to fail.

Fix Number

FIX10020893

Manufacturer Part Number

9.134-019.0

This is a genuine male adaptor, sold individually. This male adaptor attaches to the female hose connector on your pressure washer. This black plastic adaptor is located inside the hose connector and fastens it to the pump, allowing the connector to rotate. As you use your pressure washer, the adaptor can begin to wear and can eventually break. This is a quick and easy repair, that begins by removing the inlet filter from the hose connector, then use a hex socket to remove the male adaptor and the O-ring. Install the O-ring onto the male adaptor and connect the male adaptor into the female connector. This assembly can now be installed onto the pump, and the inlet filter can be re-installed.

Fix Number

FIX9984358

Manufacturer Part Number

6.362-634.0

This is an OEM O-ring, designed for pressure washers. This rubber O-ring is sold dividually and is part of the pump assembly. It fits in between the female hose connector and male adapter on the cylinder head. It measures approximately 15.6-mm by 1.78-mm. Like all O-rings, it is prone to deteriorate over time and will fail. It will become obvious that a replacement is necessary if water is leaking and impacting your pressure washer performance.

Fix Number

FIX9917474

Manufacturer Part Number

2.884-916.0

This part is a Retrofit Valve that will work on the older models as well as the newer models. Older units have shorter valves than the new pumps but you can change the length of the stem to adjust for the older units.