Industrial Fan / Circulator Parts

Popular Industrial Fan / Circulator Parts

Caster Foot, Rear
$25.99
In Stock
Fix Number
FIX11866794
Manufacturer Part Number
20078
It is a genuine manufacturer sourced replacement part is specially designed for use with Ridgid wet and dry vacuums. This caster wheel helps to secure the wheel that allows for easy transportation. It is made from durable plastic and it is sold individually, please note the caster wheel itself is sold separately.
Filter
$67.52
In Stock
Fix Number
FIX11869484
Manufacturer Part Number
72952
This filter is too long to fit on some of the tools it is compatible with. If you are having trouble with installation, try the following: • 1. Unscrew the filter plate 2. Flip the filter plate over 3. Screw the filter plate back in. (VF5000) 2 Stage 7.5
Vf3500 3 Layer Filter For Wd40
$45.98
In Stock
Fix Number
FIX11867025
Manufacturer Part Number
26643
This 3 layer filter is specially manufactured for use with Ridgid vacuums. It is an authentic OEM sourced item, it is not an aftermarket imitation. This is the main filter that helps to remove dust and other contaminants from the air. This pleated filter offers 3 layers of protection when picking up cold fireplace ash, fine dust and everyday dirt. Filters should be cleaned or changed at least every two months under normal use. Please note, one item is included per order. No special tools needed to replace this filter.
Brush And Brush Holder (brush
$25.99
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11867193
Manufacturer Part Number
30438
This brush and brush holder set is supplied by the original manufacturer for use in vacuums. It includes 2 carbon brushes, 2 brush holders, and two springs. The brushes have measurements of 1.5 inches long, 3/4 inches wide, and 3/16 inches thick. Over time the brushes may wear down, become damaged, or dislodged, leading to reduced power output, unusual noses, and difficulties starting the equipment. Ensure the equipment is switched off before beginning the repair. Remove the motor housing to access the brushes. Carefully remove the springs and fasteners that hold the brush and holders in place. Mount the new brush holders onto the motor and position the new brushes into the holders. Secure the brushes in place with the spring and reattach the motor housing to complete the repair.
2 Speed/3 Speed Pull Chain Swi
$26.96
On Order
Fix Number
FIX10261110
Manufacturer Part Number
01723
This is an authentic OEM replacement part. This 2 speed/3 speed pull chain switch is commonly used with industrial fans and circulators. Over time the mechanism that switches your fan on and off, as well as adjusts speed, can wear out. If this has happened to the switch on your fan this is the replacement pull chain switch you need. The chain is made out of metal, and the housing is made of plastic. This pull chain switch is sold individually.
Rocker Switch
$61.81
In Stock
Fix Number
FIX10261109
Manufacturer Part Number
01722
This is a genuine OEM replacement part sourced directly from the manufacturer. This rocker switch is commonly used with industrial fans, portable fans and circulators. This rocker switch is used to turn the fan on and off. This mechanism will wear out over time, at which point the switch will need to be replaced. To successfully remove and replace the rocker switch you will need a screwdriver. This switch is made of plastic, and it is sold individually.
1 7/8 Extension Wand
$19.33
In Stock
Fix Number
FIX11867304
Manufacturer Part Number
31728
This is an authentic OEM part sourced from the original manufacturer. This 22" long extension wand fits onto the hose, with a locking hinge to keep it connected. It fits all Ridgid hoses and attachments that have 1-7/8" diameter openings. One extension wand is included.
Belt
$86.68
In Stock
Fix Number
FIX12006082
Manufacturer Part Number
82812
This OEM drive belt fits Airmaster portable fans and mancoolers, providing dependable performance for the pulley system. Replace when worn or broken to maintain smooth operation. Installation is quick with basic tools.
Hose, 7` Super Flex
$75.03
In Stock
Fix Number
FIX11866974
Manufacturer Part Number
23773
This authentic manufacturer-approved part which is specially made for use with Ridgid vacuums. It is a high-quality replacement for a missing or a faulty 7" super flex hose that was included with a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable plastic and is sold individually.
Latch Drum (WD1950)
$17.39
In Stock
Fix Number
FIX11866970
Manufacturer Part Number
23693

Industrial Fan / Circulator Brands

Related Industrial Fan / Circulator Parts

Popular Industrial Fan / Circulator Models