Roper Dehumidifier Parts

Roper Appliance Parts
Shop By Appliance Type

Popular Roper Dehumidifier Parts

$8.04
In Stock
Float
Fix Number FIX11738360
Manufacturer Part Number WP1172075
$76.16
In Stock
Humidistat Control
Fix Number FIX11738359
Manufacturer Part Number WP1168670
$102.77
In Stock
Bucket Water Level Switch
Fix Number FIX992307
Manufacturer Part Number 1188814
This part is used to prevent water overflow when the bucket gets full.
Installation Instructions
Bernard from Bridgewater, NJ
Swap out bucket water level switch
The Bucket Water Switch Level Failed. The switch which tells of a fulI water bucket failed the light light would stay on and the dehumidifier would not run even if the bucket was empty.I ordered the part from this site using the model # and manufacturer.Since The part as instock it arrived quickly. To repair/Replace switch first unplug the unit, then unscrew with phillips head screw driver all outer housing screws. The swich is in a plastic holder attached to an inside wall. first label the 3 wires and where they are attached to the switch. Disconnect the wires from the switch.Pinch the switch holder and pull out switch and holder from the front of the unit. The new switch holder is different in my old model so i removed the switch from the new holder and placed it in the old holder. Now slide the new switch back into the unit from the front until it snaps in firmly. Attach the labeled wires to the switch contacts. Place the metal side housing back in place and screw on. Attach the top of the unit by aligning it with the hole on the top of the unit slide it back on the unit it sould lock into place. Plug the unit in and press the little plunger in and the light on top will illuminate and the unit will stop running Read more...
$9.56
In Stock
Hex Nut
Fix Number FIX11742711
Manufacturer Part Number WP488130
Part may differ in appearance, but functions same as original.

Appliance Type

Popular Roper Dehumidifier Models