Part Location Diagram of 650508-0 Makita Switch
See part 119 in the diagram
( Grid squares measure 1x1 inch )

Switch 650508-0

Works With Model HR2475!
$57.46
In Stock
Fix Number:
FIX10153485
Manufacturer #:
650508-0
Manufactured by:
Makita
Works With Model HR2475!

Product Description

Genuine manufacturer approved replacement switch used on Makita rotary hammers. It is the part of the tool handling on/off operations. Since switches have moving mechanical parts, they will eventually wear out and will require a replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Model Compatibility

This part works with the following models:
Fix Number: FIX10153485
Manufacturer Part Number: 650508-0
Brand Model Number Description
Makita HR2020 Drill - Drill
Makita HR2432 Hammer Drill - Rotary Hammer
Makita HR2445 Hammer Drill - 1" D - Handle 2-Mode Rotary Hammer
Makita HR2450 Hammer - Rotary Hammer
Makita HR2450F Hammer Drill - Rotary Hammer
Makita HR2450X3 Hammer - Rotary Hammer
Makita HR2455 Hammer Drill - D-Handle Rotary Hammer
Makita HR2475 Hammer Drill - D-Handle Rotary Hammer
Makita HR2621 Hammer Drill - 1" AVT Rotary Hammer
Makita HR2641 Hammer Drill - 1" AVT Rotary Hammer
Makita HR2641X1 Hammer - Rotary Hammer
Makita HR2661 Hammer - Rotary Hammer