Models > HR2432

HR2432 Makita Hammer Drill

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for HR2432

Viewing 1 of 1
Page A Diagram and Parts List for Makita Hammer Drill
Page A
Keep searches simple, eg. "belt" or "pump".
Power Cord – Part Number: 664064-4
$35.26
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...
In Stock
Order now and your part arrives by May 18
Carbon Brush Set – Part Number: CB407
$19.19
This set comes with two carbon brushes with wire leads and brush strings attached. If your motor is not running efficiently or is operating intermittently, this is a common sign of worn brushes. Due t...
In Stock
Order now and your part arrives by May 18
Tapping Screw – Part Number: 265995-6
$6.51
This is a self-tapping screw, and it is found on multiple power tools and lawn equipment. This screw is different because it can tap its own hole into tough materials, such as metals and hard plastics...
In Stock
Order now and your part arrives by May 18
Ball Bearing – Part Number: 211031-6
$26.20
Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating par...
In Stock
Order now and your part arrives by May 18
Steel Ball – Part Number: 216022-2
$6.51
This steel ball is an authentic OEM component which is specially designed for use with Makita rotary hammers. The ball is fitted within the tool holder, providing the ability to secure a drill bit. It...
In Stock
Order now and your part arrives by May 18
Ball Bearing 607llb – Part Number: 211021-9
$20.85
This replacement ball bearing is an authentic Makita item. It is supplied directly from original equipment manufacturer for use with angle grinders. Please check diagrams for proper application of thi...
In Stock
Order now and your part arrives by May 18
Switch – Part Number: 650508-0
$57.46
Genuine manufacturer approved replacement switch used on Makita rotary hammers. It is the part of the tool handling on/off operations. Since switches have moving mechanical parts, they will eventually...
In Stock
Order now and your part arrives by May 18
Flat Washer 6 – Part Number: 941151-9
$6.51
This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with circular saws, table saws, masonry saws, planers, demolition hammers, and angle cutter...
In Stock
Order now and your part arrives by May 18
Flat Washer 5 – Part Number: 941102-2
$6.51
This replacement flat washer is a genuine OEM part, not an aftermarket equivalent. It is specially manufactured for use with Makita power tools. This standard hardware has multiple applications depend...
In Stock
Order now and your part arrives by May 18
Ball Bearing 6001ddw – Part Number: 211131-2
$31.31
This is an authentic part made by original manufacturer. This bearing is compatible with various Makita power tools. A bearing serves to separate and buffer moving parts. It also keeps the moving part...
In Stock
Order now and your part arrives by May 18
Cord Guard 8 – Part Number: 682559-5
$6.51
This cord protector is an OEM part designed for a variety of Makita power tools. It is attached where the power cord meets the tool. This part protects the cord from damage due to pulling, bending, or...
In Stock
Order now and your part arrives by May 18
Cap 35 – Part Number: 286263-4
$6.51
This part is priced individually. The rubber cap fits on the nose of the device next to the ring spring and the chuck cover. A screwdriver may be needed to replace this part if it becomes broken. This...
In Stock
Order now and your part arrives by May 18
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Power Cord

Replacing the Power Cord

Replacing the Carbon Brush Set

Replacing the Carbon Brush Set

Replacing the Cord Guard 8

Replacing the Cord Guard 8

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bruce from HILLSBORO, OR
Parts Used:
664064-4
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
4 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More