Air Inlet Cover Kit

Googled problem & ordered a damper/fan assembly. Followed instruction sheet that arrived in box with part. There were five screws to remove. I unplugged the light , removed water filter and the fan assembly pulled out. Unhook fan wires and reversed process for new part.Was a very easy fix. Fridge works great!!

I followed the first two repair instructions. When it came to removing the inlet cover, getting the bottom section off was tricky. This is when the second person's instructions became critical. I had to pry with a screw driver at the top, very gently, and work it off. Realizing that the cover came with two different parts was importan ... Read more t. I did not need to use them both. I threw away the plastic one and just used the foam one. It took some extra pushing help to hold the cover in place as I screwed it back in place. I did forget the two screws on the light fixture, but they were easy to put in. Everything works great. I never installed the sensor as they were not needed. There are three of them!

Most probable reasons were malfunctioning thermistors or broken damper door between refrigerator and freezer. Took damper assembly apart and verified it was a broken damper door. Unscrewing 6 screws revealed damper door. Ordered part and reassembled. Fridge and freezer are working perfectly again.