Barrier Screen - Black

Extremely easy! Open the door. Take a utility knife and with the blade extended 1.5" run it down between the barrier and the door. A thin layer of adhesive holds the barrier in place and the knife breaks the adhesive. Slide the damaged barrier screen out. I removed the adhesive (with rubbing alcohol) and replaced it with double stick ... Read more tape on the barrier screen. (Note, put it on the screen not the door frame as that will make the installation easier). Slide the new barrier screen in making sure it goes to the end and is flush with the door frame on the right. Press to make sure the double stick tape adheres and you're done! It really is that easy.

The barrier just slips out..sort of push it together to kind of bend it in the middle...there is some sticky glue that holds the stainless trim in place that can hinder sliding the new black barrier in place....overall really easy.