Electronic Control Board

replaced the complete fresh food ice maker which was fairly easy and then replaced the motherboard under the fridge. Not really hard but did have to figure out how to undo the 4 connections at the motherboard. probably would have been fairly easy if my eye sight had been a little better. Just a note for anybody doing this operation. When ... Read more I fired up the fridge everything worked except when I put the switch to ice or crushed ice the light would start flashing and would not despence ice. I thought something must be wrong with the auger or the user board.However after about 30 hours they both started working. I'm guessing the fresh food ice maker had to completely fill with ice so the sensor would let it work. anyway about $300.00 later we are back in business. Also you cannot see the screw without a mirror that holds the icemaker in place. To save you guy's the trouble I had it's a 5/16 hex head.