LIMITER-TEMPERATURE

Removed the kick plate(3 T20 screws under the bottom edge) , top (Two T20 screws back corners), the control panel section (unclips) and the center section (3 T20's, upper corners and center of panel under kickplate), then slid the front up and unhooked enough plugs to get to the sensor and high limit at the bottom of the front. Removed t ... Read more he back cover(lots of T20 screws, two types, don't mix them up.) and replaced the limit and sensor there too. In my case, The multimeter said the only limit that was bad was the front, but no reason not to change them all while here.