If your dryer will not start, the timer will not advance, or it shuts off too soon, there may be an issue with the dryer timer. If your timer needs to be replaced, this is a genuine OEM part. Please note that the knob to set the timer is sold separately, be careful not to damage yours when removing the knob to install the new timer. Before beginning this repair, please be sure to disconnect the power supply to your dryer. You will need to pull it out far enough from the wall in order to access the back panel. Before removing the wires, it may help to take a photo first, so that they can be attached to the proper terminal on the new timer. The timer is held in place on the control panel with two metal hooks locking into two plastic tabs. Carefully rotate the timer counterclockwise to remove, and clockwise to install the new timer into place.
-
Works with the following brands:
General Electric, Hotpoint
-
Works with the following products:
Dryer
-
Fixes the following symptoms:
Timer Not Working, Won’t Start
-
Part# WE4M533 replaces these:
AP5780508, WE04M0533, WE4M364
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
-
Dryer
- Fixes the following symptoms
- Timer Not Working, Won’t Start
Part Number Cross Reference
- Part# WE4M533 replaces these:
-
AP5780508, WE04M0533, WE4M364