BEARING,BALL
- Fix Number:
- FIX7785070
- Manufacturer #:
- 4280EN4001D
- Manufactured by:
- LG
- Product Description
- This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the washer tub. This model is sold individually and measures to have a 2.5-inch outer diameter. As this bearing is very difficult to install, the manufacturer recommends completely replacing the rear tub and bearing assembly. If you are only installing the rear bearing, consider replacing the seal and the other bearing as they wear out together.
- Works with the following brands:
- LG, Kenmore
- Works with the following products
- Washer, Washer Dryer Combo
- Part# 4280EN4001D replaces these:
- 4280EN4001N, 4280EN4001S, 4280EN4001Y, 4280FR4048E, AGF76083931
Product Description
This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the washer tub. This model is sold individually and measures to have a 2.5-inch outer diameter. As this bearing is very difficult to install, the manufacturer recommends completely replacing the rear tub and bearing assembly. If you are only installing the rear bearing, consider replacing the seal and the other bearing as they wear out together.
-
Works with the following brands:LG, Kenmore
-
Works with the following products:Washer, Washer Dryer Combo
-
Part# 4280EN4001D replaces these:4280EN4001N, 4280EN4001S, 4280EN4001Y, 4280FR4048E, AGF76083931
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
- Customer:
- Greg from Hillsboro, OR
- Parts Used:
- 4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
- Customer:
- Charlie from Diamondhead, MS
- Parts Used:
- 4434ER0002H, 4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
- Customer:
- Craig from Buckeye, AZ
- Parts Used:
- 4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Customer:
- Bruce from West Hills, CA
- Parts Used:
- 4280EN4001C, 4280EN4001D, 4036ER2004A
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
YouTube video made it easier. It was a different model but it still worked. First when you take your Machine apart put all the Screws and bolts back in the holes where you can, so you can find them later. This is a big job. If you're not mechanically inclined don't try it.
... Read more >Nevertheless, it was a lot easier than I thought. Use a camera/phone for pictures of the wiring. The hardest part of the job was getting the old bearings out. Do it like they show you on YouTube, Use a socket with an extension and a good mallet to the pound out the old bearings, the Gasket came out easy. Put your new bearings in place and gasket and your just about home free.
Reassembling the wash machine went fast. I don’t know what else to say I’m an older retired man with back problems and I did it. Just use common sense and you'll be fine. YouTube said it was a 5 hour job it took me about 10 hours, 8 hours taking it apart thanks to those darn stuck bearings. Less than two putting it back together.
The next time I'll do it in 5 hours or less. Lol
Hay what do you have to lose? It would cost more for a repairman or buying a new machine. Worst case scenario is make it easier to carry out the machine.
Oh by the way, I did this in 2 different sessions. Started before the bearings arrived and finished when they arrived.
Good luck
- Customer:
- Regulo from College Point, NY
- Parts Used:
- 4986ER0001D, 4280EN4001C, 4280EN4001D, 4036ER2004A
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
- Customer:
- Eduard from Indianapolis, IN
- Parts Used:
- 4986ER0004F, 4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Customer:
- Carlos from Findlay, OH
- Parts Used:
- 4280EN4001C, 4280EN4001D, 4036ER2004A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: 4280EN4001D
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.