Part Location Diagram of 8193768 Whirlpool 3rd Level Wash Spinner Kit
See part 3 in the diagram
Replacing your Kenmore Dishwasher 3rd Level Wash Spinner Kit
( Grid squares measure 1x1 inch )

3rd Level Wash Spinner Kit 8193768

Rated by 7 customers 

?

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$23.05
In Stock
Fix Number:
FIX734590
Manufacturer #:
8193768
Manufactured by:
Whirlpool

Product Description

This part is the top spinner located at the very top of the wash tub. Water passes through all the spinners causing it to dispense all around the tub.

Videos For installing this part.

Replacing your 3rd Level Wash Spinner Kit

Replacing your 3rd Level Wash Spinner Kit

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.7 / 5.0, 7 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Randall from Brackney, PA
Parts Used:
8193768
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3rd level spinner came off the machine
followed the video instructions and had to problems with the job from start to finish.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carolyn from Powhatan, VA
Parts Used:
8193768
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
spinner fell off 3rd level of dishwasher
Good info from others who fixed this. Remember to put paper in bottom of dishwasher because you probably will drop parts. I noticed that the old spinner had a very petro-chemical smell so be sure to dispose of it promptly. Great to be able to make repairs without calling a serviceman
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pete from Charleston, SC
Parts Used:
8193768
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replace spinner
Remove both dish racks. Remove upper am screws on top and side of dishwasher. Remove any remaining pieces of old spinner, snap new spinner on arm. Replace screws, dishwasher ready to run.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Bend, OR
Parts Used:
8193768
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top spinner came off.
Remove the two screws from the top water supply. This allows the assembly to bend forward. Place the new barb fitting on top and push the spinner up with the female connector to attach. It is easy to see that the old barb piece was worn. It would be better if t offered a package with two barbs and not the spinner.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Howard from Durham, NC
Parts Used:
8193768
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
plug holding 3rd level spinner broke off and spinner was in bottom of dishwasher
Follow instructions provided by this site
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Homosassa, FL
Parts Used:
8193768
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Spinner retainer pin damaged
Remove top rack. Remove top screw holding the water duct to the roof of the dishwasher, pull water duct down gently and remove old retainer pin. Insert new spinner with new pin retainer, push in new pin, reinstall screw to hold water duct to roof of dishwasher, replace top rack. Whole operation took no more than 2-3 minutes max.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ted from Mastic Beach, NY
Parts Used:
8193768
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Upper washer spinner kit
Remove the top rack was easy just 2 plastic retaining clips from the rack slide rails. Pull the rack out to expose the wash spinner location. Remove 1 screw # 2 phillips head screw closet to the spinner. Pull down the plastic insert and your in snap in the new kit and reinstall the screw and top rack. 15 mins. Love this site. It helps yo u folks fix anything.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX734590
Manufacturer Part Number: 8193768
Brand Model Number Description
Kenmore 665110739120 Dishwasher
Kenmore 665110739130 Dishwasher
Kenmore 665110739140 Dishwasher
Kenmore 665110739190 Dishwasher
Kenmore 66514353300 Dishwasher
Kenmore 66514353301 Dishwasher
Kenmore 66515872000 Dishwasher
Kenmore 66515874000 Dishwasher
Kenmore 66515879000 Dishwasher
Kenmore 66515882000 Dishwasher
Kenmore 66515884000 Dishwasher
Kenmore 66515887000 Dishwasher
Kenmore 66515889000 Dishwasher
Kenmore 66515892100 Dishwasher
Kenmore 66515894100 Dishwasher
Kenmore 66515899100 Dishwasher
Kenmore 66515912000 Dishwasher
Kenmore 66515912001 Dishwasher
Kenmore 66515914000 Dishwasher
Kenmore 66515914001 Dishwasher
Kenmore 66515919000 Dishwasher
Kenmore 66515919001 Dishwasher
Kenmore 66515922000 Dishwasher
Kenmore 66515922001 Dishwasher
Kenmore 66515923000 Dishwasher
Kenmore 66515923001 Dishwasher
Kenmore 66515924000 Dishwasher
Kenmore 66515924001 Dishwasher
Kenmore 66515929000 Dishwasher
Kenmore 66515929001 Dishwasher