Magnetron
- Fix Number:
- FIX3529034
- Manufacturer #:
- 6324W1A001L
- Manufactured by:
- LG
- Product Description
- This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron becomes defective, your food may not heat up properly or heat up at all. Additionally, buzzing or humming sounds may be noticeable while the microwave is in operation. With a malfunctioning magnetron, your microwave loses its primary function. To remove it, you first need to unplug your microwave from its outlet. Before touching any components, discharge the capacitor by placing a screwdriver, with an insulated handle, across the two terminals of the capacitor. Once the capacitor is discharged, replace the current magnetron by disconnecting it from any wires and removing any mounting screws or clips. This magnetron is sold individually and is supplied directly from the original equipment manufacturer.
- Works with the following brands:
- LG, Kenmore, General Electric, Whirlpool
- Works with the following products
- Microwave, Range, Wall Oven, Microwave Oven Combo
- Fixes the following symptoms
- No heat
- Part# 6324W1A001L replaces these:
- 6324W1A001A, 6324W1A001B, 6324W1A001E, 6324W1A001H, 6324W1A001L, 6324W1A001Y, EAS42812902, EAS42812905, EAS42812906, WB27X10309
Product Description
This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron becomes defective, your food may not heat up properly or heat up at all. Additionally, buzzing or humming sounds may be noticeable while the microwave is in operation. With a malfunctioning magnetron, your microwave loses its primary function. To remove it, you first need to unplug your microwave from its outlet. Before touching any components, discharge the capacitor by placing a screwdriver, with an insulated handle, across the two terminals of the capacitor. Once the capacitor is discharged, replace the current magnetron by disconnecting it from any wires and removing any mounting screws or clips. This magnetron is sold individually and is supplied directly from the original equipment manufacturer.
-
Works with the following brands:LG, Kenmore, General Electric, Whirlpool
-
Works with the following products:Microwave, Range, Wall Oven, Microwave Oven Combo
-
Fixes the following symptoms:No heat
-
Part# 6324W1A001L replaces these:6324W1A001A, 6324W1A001B, 6324W1A001E, 6324W1A001H, 6324W1A001L, 6324W1A001Y ... Show more , EAS42812902, EAS42812905, EAS42812906, WB27X10309 Show less
Questions and Answers
Be the first to ask our experts a question about this part!
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
- Customer:
- Ashly from NAVARRE, FL
- Parts Used:
- 6324W1A001L
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
-Removed microwave from the wall to move it to a table to work on.
-Removed screws in the cover(all along edges on top, sides, back, and bottom)
-Removed sheetmetal covering for top and sides.
-Removed Control Circuit Board Panel (Just to the right of the door).
-Tested all thr ... Read more ee safety switches for door interlock (all checked good)
-Put back together to try again, with no luck.
-All signs pointed to the magnetron so that's what I ordered next.
-Let the microwave sit unplugged for the week that I waited for the part to arrive.
-Received part, unpackaged, everything looked very similar to the original, with one slight difference.
-The two wire connectors on the magnetron are labelled FA and F. I noticed that on the original the FA was on the left side and the F terminal was on the right. One the new magnetron they were on opposite sides.
-No big deal, took the wire connector off of the original magnetron and took apart, this allowed me to swap the FA & F cables to match the correct sides of the new magnetron.
-Removed 1 screw on a bracket inside and to the front of the magnetron
-Removed 4 screw from the top side of the microwave that held the magnetron in place.
-Removed old magnetron
-Installed new magnetron
-Performed all the above steps in reverse
Good Luck!!!
- Customer:
- John from Mountain View, CA
- Parts Used:
- 6324W1A001L
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: 6324W1A001L
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.