Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Idler Pulley Wheel
Works With Model DDC4482PE!
$31.03
In Stock
- Fix Number:
- FIX265714
- Manufacturer #:
- WE12X81
- Manufactured by:
- GE
Works With Model DDC4482PE!
- Product Description
- This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy
- Part# WE12X81 replaces these:
- AP2620211, 275154, WE01X0530, WE01X0759, WE12X0033, WE12X0047, WE12X0081, WE12X33, WE12X47, WE12X81R, WE1X530, WE1X759, WE1X759D
Part Number Cross Reference
Product Description
This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy
-
Part# WE12X81 replaces these:AP2620211, 275154, WE01X0530, WE01X0759, WE12X0033, WE12X0047 ... Show more , WE12X0081, WE12X33, WE12X47, WE12X81R, WE1X530, WE1X759, WE1X759D Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Belt
The belt had broken on the dryer and I had purchased a replacement locally. What I found after dissembling the dryer was the drum slides, idler pulley wheel and rear drum bearing were very worn and needed replaced. Each were very easy to remove and replace. Slight challenges were lining up the pulley, reseating the drum with the belt a
... Read more
nd solving the how the two (belt and pulley) were configured. It did require a second person. Note: Do not drop any parts into the dryer when reassembling. It will require you to start all over.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- HARRY from CORRALES, NM
- Parts Used:
- WE12X81
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The drum stopped tumbling.
I'd done this job before - the dryer is over 40 years old, simple and reliable. After unplugging the unit, I removed the vent hose where connected to the lower rear panel with a screwdriver. Using the nut driver, I removed the seven or so screws holding the rear panel, then removed it. With a flashlight, I could see the broken pulley whee
... Read more
l. The drive belt was still in good condition, thankfully. I removed the eclip holding the remnents of the idler wheel and removed it. I cleaned up everything I could reach with a rag and vacuum, then slipped on the new wheel, the eclip, and reattached the drive belt. I plugged in the dryer and ran it for a while to check my work, then unplugged it. I reattached the bottom panel again, hooked up the dryer vent, and moved the dryer back into position. Plugged it in, and it was good to go. The directions that came with the part are very clear and easy to follow. I'd done this repair twice before.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX265714
Manufacturer Part Number: WE12X81
Manufacturer Part Number: WE12X81
Brand
Model Number
Description
✖
Mail-In Recycling Rebate