Dual Element Infinite Switch WB24T10058

Hello Aaron, Thank you for your inquiry. You can test the parts with a multimeter. Put the multimeter on the Rx1 setting, and touch the probes to the terminals. The first part you will want to check is your radiant element. The exact reading you should receive varies between models, refer to your owner’s manual to determine what yours should be, but if any element has a reading outside of 19 to 115 ohms, it is defective. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!