GASKET - TRANSMISSION W11805888
$49.95
In Stock
- Fix Number:
- FIX20055578
- Manufacturer #:
- W11805888
- Manufactured by:
- Whirlpool
Product Description
-
Works with the following brands:Estate, KitchenAid, Roper, Whirlpool
-
Part# W11805888 replaces these:4169822, WP4162324
- Works with the following brands:
- Estate, KitchenAid, Roper, Whirlpool
- Part# W11805888 replaces these:
- 4169822, WP4162324
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Neil from College Place, WA
- Parts Used:
- W11805888
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Gear stripped due more than normal useage
Dissembled mixer found gear had stripped. Ordered new gasket, gear and washer. Stated reassembly damaged new gasket and had to another. Started reassembly minor alignment adjustments. Put in more food grade grease. Put brushes back in no rotation of motor. Found out that bushes have go in exactly right. Plugged in and it works fine.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Kent, WA
- Parts Used:
- W11805888, WP240309-2
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
stripped out the worm gear
This is a relatively easy repair. There are a number of steps to getting access to the gear and bracket but easy to figure out. Once the assembly is opened up the gear bracket is exposed and three screws removes it and reinstalls the new piece. Once it is exposed I recommend cleaning the inside of all the old grease and putting fresh i
... Read more
n. I also recommend replacing the Transmission Case Gasket. Both can be purchased from this site. Then reassemble. Prior to putting the back housing piece on, which is the one of the last pieces take a few minutes to look on uTube for instructions on how adjust the speeds of the mixer. This is also very simple and frankly shouldn't be overlooked. Many mixers seem to loose "speeds" over time. A tune up repairs all the presets so the mixer is running at the appropriate speeds and all the speeds. Mine seemed to not have two of the speeds, and initially I thought I had lost some gears. But a tune up restored them.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.