Switch Assembly with Fuse 12001514

Hi Gary, thank you for contacting us. To replace the lid switch on your washer, please go through the following steps: 1. Unplug the washer/dryer. 2. Remove the top panel by first pulling the washer away from the dryer above it, then remove two screws under the top panel at the front. 3. Pull the panel toward you to remove from tabs in the back. 4. Lift the top panel enough to remove the switch assembly (which is located just behind the lid) by removing two screws, and unplugging the wiring harness. 5. Pay attention to where everything goes so you get it back together right, particularly note the placement of the switch actuator arm under the rod on the lid. 6. Replace with a new switch and put everything back together again. We hope this information helps, good luck with this repair!