18782557-1-M-Homelite-203658001-MOTOR AND WIRING HARNESS ASSEM
Part Location Diagram of 203658001 Homelite MOTOR AND WIRING HARNESS ASSEM
See part A-6 in the diagram
( Grid squares measure 1x1 inch )
18782557-1-S-Homelite-203658001-MOTOR AND WIRING HARNESS ASSEM 18782557-2-S-Homelite-203658001-MOTOR AND WIRING HARNESS ASSEM 18782557-3-S-Homelite-203658001-MOTOR AND WIRING HARNESS ASSEM Part Location Diagram of 203658001 Homelite MOTOR AND WIRING HARNESS ASSEM

MOTOR AND WIRING HARNESS ASSEM 203658001

★★★★★
★★★★★
9 Reviews

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$39.39
In Stock
Fix Number:
FIX18782557
Manufacturer #:
203658001
Manufactured by:
Homelite

Jump to:

Product Description

  • Works with the following brands:
    Ryobi
  • Works with the following products:
    Chainsaw
  • Fixes the following symptoms:
    Will Not Start
  • Part# 203658001 replaces these:
    203658001
Works with the following brands:
Ryobi
Works with the following products
Chainsaw
Fixes the following symptoms
Will Not Start
Part Number Cross Reference
Part# 203658001 replaces these:
203658001

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Washing Machine Cleaner - 3 pack
$19.75
Special Order
Part Number: FIX1960673
This three count package of Affresh Washing Machine Cleaner helps remove odor causing residue from inside the washer, each slow dissolving tablet works throughout the wash cycle and is suitable for all washer brands, inc...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Appliance Cleaner
$53.85
Special Order
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Patrick from SAN JOSE, CA
Parts Used:
203658001
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
motor stops running
You have to disassemble the entire chainsaw to swap old motor for new motor. You need a T15 hex bit, 2.5mm security hex bit and phillips screwdriver. Remove the battery. Remove chainsaw bar and chain. Remove every screw in the housing. Remove the clip on the motor shaft. If everything does not come apart easily then you may have missed a screw. Remove screws holding the motor and gear case in. Open the gear case. Remove the gears. Remove the screws inside the gear case attaching it to the motor. Attach the gear case to the new motor. Reassemble the gear case and attach to the housing. Route the wires and switch to the appropriate locations. Reassemble housing. Reattach bar and chain.
Read less
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Buzz from BURNSVILLE, NC
Parts Used:
311124002, 203658001, 670608002
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Motor died, needed replacing
There's not much out there to tear the machine apart. I previously replaced the input gear assembly which meant taking everything apart. I was careful to take photos of how things looked before disassembling and that helped somewhat. It's not hard, you just need to be observant how the wires tuck into the slotted recesses so they don't b ind when re-assembling. Housings may need some wiggling and jiggling to get aligned but if everything's in its place the exterior housings enclosing the motor assembly and the larger shells will go together nicely; if the parts don't seem to be going together right there's something in the way binding it up. If I had to do the entire process again it probably would take about 30 minutes but I'm slow at these things and it took more like an hour or more. Good news is the chainsaw works like it should with a new motor. I have one body screw left over that goes somewhere and that's a little troubling but not losing sleep over it.
Read less
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steven from GOLDSBORO, MD
Parts Used:
203658001, 203642001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
brushes in motor ate into stator
Use the image of the parts blowup to see where each of the screws go to reassemble the saw after replacing the motor.

The motor is the heart of the unit so I had to take apart the entire saw to get to it.

Took around an hour.

You will need a torx bit (T25 if I recall correctly)
two of the screws have a tamperproof torx head but I was able to break off the center pin to then use a regular torx bit on those as well.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
★ Customer Reviews
Average Rating: (9 Reviews)
4.6
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles C - April 29, 2021
Verified Purchase
Perfect cure for Ryobi 10" 18v Chain Saw
fit great and works perfect! replaced all electrical components in saw . All you need is a philips screw driver, a torx driver and about half an hour.
★★★★★
★★★★★
Maxim B - February 27, 2020
Verified Purchase
Works great, very quick delivery!
Looks like a twin brother of Ryobi motor I was replacing. Had all the wiring for snap-in installation, which simplified replacement process. Works fine. Delivered fairly quickly.
★★★★★
★★★★★
Raymond H - August 15, 2021
Verified Purchase
Ryobi chainsaw motor
Exact fit. Item was packaged adequately. Website photos were very helpful.
★★★★★
★★★★★
Don B - September 13, 2020
Verified Purchase
Exactly the part I needed
It was simple to replace the part. Be careful. It would be easy to install the battery connector backwards.
★★★★★
★★★★★
Larry M - August 1, 2021
Verified Purchase
Motor
Saw works great now had a little problem with the polarization of the battery but it works as it did before Great product
★★★★★
★★★★★
Alfred A - September 1, 2020
Verified Purchase
Everything works
Replaced the motor and the hardest part was just getting the right bits for the screws and then removing the caliper to free the gear. Just used two needle nose pliers since I didn’t have a caliper.
★★★★★
★★★★★
Patrick C - March 29, 2021
Verified Purchase
works fine
Fits and operates just like the original parts.
★★★★★
★★★★★
James L - April 4, 2020
Verified Purchase
Motor needed
Motor received. Fit perfectly, only had two screws left over.....
★★★★★
★★★★★
Frank D - September 16, 2022
Verified Purchase
Good service, poor part
Received part within a few days, fast shipping, how ever the replacement motor for my Ryobi chainsaw failed in less than 5 mins, terrible replacement part

Model Compatibility

This part works with the following models:
Fix Number: FIX18782557
Manufacturer Part Number: 203658001
Brand Model Number Description
Ryobi P546 Chainsaw - 18 Volt Chainsaw Mfg. No. 107175001
MOTOR AND WIRING HARNESS ASSEM
$ 39.39
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.