Jump to:
Product Description
It is a genuine item that is supplied by the original equipment manufacturer for use with Breville coffee makers. This is a complete replacement for a missing or a faulty grinder assembly that was originally installed on a new unit. It is the part that grinds up the coffee beans. Please make sure to refer to the owners manual and the appropriate diagram of your model for the correct installation of this component. Keep in mind this high-quality grinder is sold individually. Note, the assembly includes the hardware to secure it.
-
Works with the following brands:Breville
-
Works with the following products:Espresso Machine
-
Part# SP0023159 replaces these:SP0010232
- Works with the following brands:
- Breville
- Works with the following products
- Espresso Machine
- Part# SP0023159 replaces these:
- SP0010232
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
- Customer:
- David from ENGLEWOOD, FL
- Parts Used:
- SP0023159
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
There's 5 screws holding the top cover on. Three at the top behind the water tank, and one on each front corner in a deep recess. Need a ... Read more thin long screwdriver. Once the top cover is off, there's a couple screws holding the top of the back panel, and one in a hole with a cover in it at the bottom of where the water tank sits. Had to pop the cover to that hole with a utility knife. After those are out you pretty much have to rip the cover off the back. Make sure to completely remove the bottom screw in the hidden hole. If it is still resting in the hole it will catch on the base and refuse to be removed. I fought with this one for a while. There are six molded retainer clips that need to release. If you can locate them you can depress them with a small flat screwdriver. Had to then remove a white box with 4 screws on the back interior to access the wires to splice. They were not long enough to do without removal of the "box". I don't know what the box is.
Then unplug a double wire connector near the top of the grinder unit. I think white and yellow wires.
Then remove the adjuster dial for the grind setting. If you lose the little white cap with a tiny spring under it, like i did, don't worry-- they give you another with the new grinder.... although you don't actually need it-- it just makes the clicking when you turn the grinder adjustment.
There are 4 screws holding the grinder assembly in. Once they are out and the wires are disconnected the assembly comes out fairly easy. Then basically remove and replace, cut strip and crimp the wires back on, and assemble in reverse order.
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: SP0023159
| Brand | Model Number | Description |
|---|---|---|
| Breville | BES870BKS1BCA1 | Espresso Machine - The Barista Express - Bks |
| Breville | BES870CRN1BCA1 | Espresso Machine - The Barista Express - Crn |
| Breville | BES870XL | Espresso Machine - The Barista Express |
| Breville | RM-BES870BSS1BCA1 | Espresso Machine - Rm - The Barista Express - Bss |
| Breville | RM-BES870BSXL | Espresso Machine - Rm - The Barista Express - Bks |
| Breville | RM-BES870CBXL | Espresso Machine - Rm - The Barista Express - Crn |
| Breville | RM-BES870XL | Espresso Machine - Rm - The Barista Express - Bss |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.