Tube-breather 596501
- Fix Number:
- FIX12648318
- Manufacturer #:
- 596501
- Manufactured by:
- Briggs and Stratton
Jump to:
Product Description
This breather tube is designed for small engines to support proper crankcase ventilation by routing excess pressure, oil mist, and fuel vapors back into the intake system. By preventing pressure buildup inside the engine, it helps promote smooth operation, reduce emissions, and support long-term engine durability. It’s a simple, direct replacement for maintaining reliable performance when a breather tube becomes brittle, clogged, or damaged.
-
Works with the following brands:Briggs and Stratton, Toro, MTD, Craftsman
-
Works with the following products:Engine, Lawn Mower
-
Part# 596501 replaces these:590522
- Works with the following brands:
- Briggs and Stratton, Toro, MTD, Craftsman
- Works with the following products
- Engine, Lawn Mower
- Part# 596501 replaces these:
- 590522
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
- Customer:
- Mike from West Jordan, UT
- Parts Used:
- 596501
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Pr ... Read more ep. Keep things clean as you go so you don't get grass clippings and dirt into the intake or fuel system. Empty the fuel tank, or have as little in it as possible.
1- Remove the air filter.
2- Remove the air filter housing - 4 screws, 2 different sized heads. This will disconnect the breather tube on this end of it.
3- The carburetor is loose, will come off, and needs to be moved some to replace the tube. Be careful to not lose the gaskets. The linkage usually doesn't need to be disconnected, nor does the fuel line.
4- Remove (disconnect and move to the side out of the way of the fuel tank) the cowling from the top of the engine that covers the fan impeller and crank mechanism. There are 3 to 4 screws, 1 is hidden under the label at the front of the cowling and there is usually a tab that clips under a frame piece.
5- Remove the fuel tank. There are several tabs on the bracket that clip over the mount on the fuel tank, and you will need to pry them slightly to get the tank to move. Remove it and set it on the mower deck.
6- Pull the breather tube out of the engine block. It is a tapered hole and should come out fairly easy.
7- Insert the long, tapered end of the new tube into the engine block.
8- Reverse the order of the previous steps. The fuel tanks should snap back in well with a little pressure, but make sure all of the tabs are firmly seated or it will cause problems installing the cowling. The cowling can be a little tricky to get fit down on the front. Again, make sure things are clean, particularly around the carburetor, and that you have all of the gaskets on the carb as you reinstall it.
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: 596501
| Brand | Model Number | Description |
|---|---|---|
| Briggs and Stratton | 08P502 | Engine - Briggs & Stratton Small Engine Model 08P502/0029-H1 (08P502/0029H1, 08P502/0029 H1) Parts |
| Briggs and Stratton | 08P502-0002-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0003-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0004-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0005-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0005-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0006-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0007-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0008-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0008-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0009-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0010-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0010-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0011-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0011-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0012-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0013-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0014-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0015-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0016-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0017-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0018-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0019-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0020-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0021-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0021-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0022-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0023-H1 | Engine - Engine |
| Briggs and Stratton | 08P502-0023-H5 | Engine - Engine |
| Briggs and Stratton | 08P502-0024-H1 | Engine - Engine |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.