Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Seal and Bearing W11035878
Works With Model 7MWGD1850EI0!
$69.47
In Stock
- Fix Number:
- FIX11773177
- Manufacturer #:
- W11035878
- Manufactured by:
- Whirlpool
Works With Model 7MWGD1850EI0!
- Product Description
- This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit.
- Works with the following brands:
- Whirlpool, Kenmore, KitchenAid, Maytag
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy, Marks left on clothes
- Part# W11035878 replaces these:
- 3406129, 692493, W10568603, W10663510, W10803476, W10887344, WPW10663510
Part Number Cross Reference
Product Description
This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit.
-
Works with the following brands:Whirlpool, Kenmore, KitchenAid, Maytag
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy, Marks left on clothes
-
Part# W11035878 replaces these:3406129, 692493, W10568603, W10663510, W10803476, W10887344 ... Show more , WPW10663510 Show less
Videos For installing this part.
Replacing your Seal and Bearing
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy operation
I removed the screws at the lint filter then released the fasteners at the front to allow me to open the top cover. I then unplugged the door switch and removed the 2 screws at top of front cover and removed the front. I then lifted the drum out of the dryer and removed the rear drum felt seal per instructions included with part. then glu
... Read more
ed the new seal to the rear of the drum. allowed the glue to dry (about 30 minutes) while waiting for the glue to dry I replaced the front felt bearing and seal. re-assembled the dryer and tested. Wow what a difference. I also watched both videos available on the site for the repairs I was making. Suggest when replacing the rear seal that you glue about 2 feet around and wait for the glue to set up (about 10 minutes) then install the remainder of the seal and glue in place.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chuck from Cross Lanes, WV
- Parts Used:
- W11035878
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
Drum making noise when operating and vibrating loudly
At first thought drum belt. Could see a felt belt coming from under front of dryer. Googled how to open front panel of dryer. Followed instructions and immediately saw problem. Old seal (felt) had fallen apart. Seal goes on back of panel then drum goes around this. Reverse instructions for taking apart done.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Bowling Green, OH
- Parts Used:
- W11035878, W10612022, WP22002263, WP691366, 349241T
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
drum making load noise when turned on
I removed drum from cabinet and noticed one of the drum support rollers was froze to spindle and wore down in one spot. Both front and rear drum seals were also worn. I ordered the parts and they arrived in 2days. The front drum seal was easy to install but not so much for the rear seal. I installed the rear seal before gluing bye clampin
... Read more
g the seal every foot with 6inch clamps, 5 total and then start gluing and moving the clamps, to one side. as needed. I have done several of these now and this is the best way I've found. Support rollers are easy just need a pair of pliers and a small flat head screw driver. Installing the belt over the drum bye yourself is not easy but can be done. There are several videos online that are a big help.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11773177
Manufacturer Part Number: W11035878
Manufacturer Part Number: W11035878
Brand
Model Number
Description
✖
Mail-In Recycling Rebate