This bake element is found on the bottom of the oven.
Works with the following brands:
KitchenAid, Whirlpool, Maytag, Crosley
Works with the following products:
Wall Oven, Range, Microwave Oven Combo
Fixes the following symptoms:
Element will not heat, Little to no heat when baking, Oven not heating evenly
Part# WPW10207398 replaces these:
AP6017075, 9760768, W10207398
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dwayne
April 4, 2023
I have received a new bake element for my KitchenAid oven. How do I access the old one to replace it?
Thank you,
Dwayne
For model number YKESS907SS05
Hello Dwayne, thank you for contacting us. We are providing you with the instructions that will help you replace the bake element.
1- Remove the screws securing the rear bottom access panel.
2- Disconnect the wires from the bake element terminals.
3- Open the oven door and rotate the door hinge locks back.
4- Partially close the door, then lift and pull the door out.
5- Un-thread the screws securing the oven bottom panel.
6- Un-thread the screws securing the bake element.
7- Replace the old element with the new one.
We hope this information helps!
Was this helpful?
Thank you for voting!
Dwayne
April 12, 2023
I got a new bake element for my KitchenAid oven however, I am not able to access the old one. The inside of the oven is one solid unit which has no screws to remove the base.
Is there another way to access the bake element?
For model number YKESS907SS05
Hello Dwayne, thank you for contacting us. To replace the bake element, follow the following steps:
1. Remove the screws securing the rear bottom access panel.
2. Disconnect the wires from the bake element terminals.
3. Open the oven door and rotate the door hinge so it locks back.
4. Partially close the door, then lift and pull the door out.
5. Unthread the screws securing the oven bottom panel.
6. Unthread the screws securing the baking element.
7. Replace the old element with the new one.
We hope this information helps!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following brands: Whirlpool, ...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.