Part Location Diagram of WP9741998 Whirlpool Dishwasher Overfill Standpipe Nut
See part 13 in the diagram
( Grid squares measure 1x1 inch )

Dishwasher Overfill Standpipe Nut WP9741998

Rated by 1 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$9.40
Special Order
Fix Number:
FIX11747059
Manufacturer #:
WP9741998
Manufactured by:
Whirlpool

Product Description

The overfill standpipe nut attaches the dishwasher float to the overfill standpipe

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Roger from Washington, MI
Parts Used:
W10207863, 9743070, WP9741998
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
Washer not cleaning dishes, soap left in bottom of dishwasher
Our dishwasher was not effectively washing the dishes and it was progressively getting worse until it didn't seem to do anything. Also, dishwasher soap wash left un-dissolved in the bottom of the dishwasher. Prior trouble shooting recommendations called for replacing the upper wash arm. I also found wear on the lower wash arm and bushings and the over-fill float was sticky. So I replace all of those things one item at a time. No improvement each time! Then, I found that the dishwasher can actually cycle without any water in it at all! That float only tells the water to shut off if it is overfilling. It turned out that my inlet water valve was plugged with rust from our well water! I replaced the valve and we had enough water to finally wash the dishes just as it did when new. We also discovered a new leak at the top of the front door seal, so we replaced that too. Before, with the low water level caused by the plugged valve, that leak didn't show up. Now, with enough water and the wash arms restored to like-new condition, the washer works great again.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11747059
Manufacturer Part Number: WP9741998
Brand Model Number Description
Kenmore 665110739120 Dishwasher
Kenmore 665110739130 Dishwasher
Kenmore 665110739140 Dishwasher
Kenmore 665110739190 Dishwasher
Kenmore 66513102K900 Dishwasher
Kenmore 66513102K902 Dishwasher
Kenmore 66513103K900 Dishwasher
Kenmore 66513103K902 Dishwasher
Kenmore 66513104K900 Dishwasher
Kenmore 66513104K902 Dishwasher
Kenmore 66513109K900 Dishwasher
Kenmore 66513109K902 Dishwasher
Kenmore 66513112K700 Dishwasher
Kenmore 66513112K701 Dishwasher
Kenmore 66513112K702 Dishwasher
Kenmore 66513113K700 Dishwasher
Kenmore 66513113K701 Dishwasher
Kenmore 66513113K702 Dishwasher
Kenmore 66513114K700 Dishwasher
Kenmore 66513114K701 Dishwasher
Kenmore 66513114K702 Dishwasher
Kenmore 66513119K700 Dishwasher
Kenmore 66513119K701 Dishwasher
Kenmore 66513119K702 Dishwasher
Kenmore 66513122K700 Dishwasher
Kenmore 66513122K701 Dishwasher
Kenmore 66513122K702 Dishwasher
Kenmore 66513122K703 Dishwasher
Kenmore 66513123K700 Dishwasher
Kenmore 66513123K701 Dishwasher