Control Panel and Touchpad - Stainless/Black WP5760M339-60
$329.50
On Order
- Fix Number:
- FIX11742973
- Manufacturer #:
- WP5760M339-60
- Manufactured by:
- Whirlpool
Product Description
-
Works with the following brands:Jenn-Air
-
Works with the following products:Range
-
Fixes the following symptoms:Touchpad does not respond
-
Part# WP5760M339-60 replaces these:AP6009800, 5760M339-60, 74011685
- Works with the following brands:
- Jenn-Air
- Works with the following products
- Range
- Fixes the following symptoms
- Touchpad does not respond
- Part# WP5760M339-60 replaces these:
- AP6009800, 5760M339-60, 74011685
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Anthony from Huntington Station, NY
- Parts Used:
- WP5760M339-60, WPW10175695
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
Oven controls not working
Replaced touch pad and burner knobs. First off shut the power to the stove. Slowly removed the screws and nuts that attach the touch pad panel to the stove. That includes the screws for the stove top and the screws that hold the knobs to the stove. That's what enables you to pry the top up enough to remove the face plate. The new one wa
... Read more
s not an exact match but actually a better fit than the original. There was an extra tab on the stainless portion not a problem at all. Make sure to put all the wires back behind the panel and your good to go. Worked the first time. Also make sure you test the touchpad before you button it back up. Burner knobs were straight forward.. On & Off
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.