Drum Support Roller and Shaft Assembly

I won't go into all the details of the repairs .....The videos this company provides are A+++.. Some would say I would have been better off purchasing a New dryer ...LOL if I had to use a appliance repair man for this job ...Probably ...but ...using this site certified parts , and using the easy to follow instruction videos ....It was tru ... Read more ly a very easy repair . I spent more time getting everything perfectly clean inside the dryer housing ,and letting the high temp adhesive cure than I did actually installing the parts.I can't recommend this company or the parts more ...Just take your time with removal , cleaning , and installation ....Patience !Excellent ...parts quality , shipping speed , and video installation instructions !!!! My dryer now works and SOUNDS like a new dryer ....Thank you !

First ordered new belt, glides and two rollers. When I took one of the rollers out, I noticed the inner ring of the roller and the shaft were completely wore out, which caused the loud banging noise. So I had to order the shaft assembly, which arrived the day after I placed the order (super nice job !!!). After replacing the shaft, rolle ... Read more rs, new glide and new belt, that Dryer sounds like it just came out of the appliance store, all for less than $80.

Use5/16 nut driver for all. Remove two screws from bottom of bottom panel take off. Remove two screws from bottom of door panel and remove carefully detach wires from doors switch. Remove two screws from bottom of top panel and it folds up. Remove four screws from the front tub support and lift off. Take belt off pulleys and lift tub out. ... Read more Use screwdriver to take off the snapring and pull the roller off. Two more screws to remove the roller shaft. Reverse this to put it back together. Easy.

followed instructions in vidios for belt and idler pulley and tub support rollers model in vidios different but came apart basicly the same way. dryer is 17 yrs old, glad to find parts runs quiet as new idler pulley and shaft not worn replaced anyway only belt and left hand tub support roller and shaft were worn

I watched a repair video on youtube. ordered the parts that i thought would fix the problem. I followed their instructions and was a really easy fix cost around 60 dollars.