We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
October 25, 2022
Dryer. PTS start switch pressed in, motor (drum turns) starts, let go of switch, motor stops. Is it the switch (3977456) or the motor relay (3405281) needs replacement? Please advise. Thank you
For model number 110.73942101
Hello Barry, thank you for your question. The most probable cause of the issue you described is a faulty push-to-start switch, part number FIX11742178. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Replaced five parts and then finally went up on the roof to inspect the 3" exhaust pipe. The cap was clogged. It was the four-side-slot type for keeping out weather. I replaced it with a two 90 deg L's with output pointing downward. That's wide open 3" diameter and should not clog up again.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11741695
Manufacturer Part Number: WP3405281
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.