Electronic Control Board WP2304016

I turned off power and removed the upper front panel by removing two 1/4" screws with my nut driver. Removed two more same style screws on the sides to remove the wire ice cutting mechanism. Then removed the four screws holding the upper panel to the roof of icemaker. This is the panel that the buttons saying on clean and off are located. ... Read more Also almost forgott I unplugged the three connectors attached to the panel bottom. Now once in the panel you can see the board. Mine had two Philips short screws holding it in and three wire plug connectors. Changed the board and then put everything back together and tested. So far all is working great. Thanks. Bruce