Part Location Diagram of WP2198628 Whirlpool Refrigerator Seal
See part 25 in the diagram
( Grid squares measure 1x1 inch )

Refrigerator Seal WP2198628

Works With Model WRS588FIHZ00!

Rated by 1 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$13.07
In Stock
Fix Number:
FIX11739241
Manufacturer #:
WP2198628
Manufactured by:
Whirlpool
Works With Model WRS588FIHZ00!

Product Description

This refrigerator ice dispenser drive shaft seal forms a barrier around the shaft beneath the ice bucket. It helps keep moisture and condensation from reaching the auger motor and inner door area. With a torn, brittle, or worn seal, water may pass through, leading to leaks, rust, or moisture buildup near the dispenser mechanism. Before accessing the drive assembly or removing the shaft, disconnect the refrigerator from its power supply. Replace the damaged seal to help protect the motor area and restore the barrier around the shaft. This is an OEM replacement obtained directly from the manufacturer.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Terry from NIWOT, CO
Parts Used:
W11841865, WP2198628
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Freezer not dispensing Ice - dispenser motor working but Ice Auger & Blade not turning
Take the Ice bin out
Remove the 2 screws for the holder of the ice bar
If the seal is still there remove (mine had disintegrated)
Remove the ice bar if possible
Remove the dispenser motor cover and then remove the dispenser motor after disconnecting the electrics. (Located lower down in the freezer door.
Remove th e ice bar now if you couldn't before
clean and completely dry the dispenser motor. (This is important to avoid ice build up. My ice bar had the edges rounded where water had dripped into the socket and then pushed the ice bar up.
Re-install the dispenser motor and put the cover back on.
Put the new ice bar in (I also found it slightly longer than the old one which helped also. Put the new seal on (if you bought one).
Re-install the ice bar cover.
Make sure there is no moisture where the icebox sits or on the ice box, if there is it will raise the ice holder and my start rounding the edges of the ice bar again.
You're good to go!
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11739241
Manufacturer Part Number: WP2198628
Brand Model Number Description
Kenmore 10641522500 Refrigerator
Kenmore 10641523500 Refrigerator
Kenmore 10641524500 Refrigerator
Kenmore 10641529500 Refrigerator
Kenmore 10644022600 Refrigerator
Kenmore 10644022601 Refrigerator
Kenmore 10644022602 Refrigerator
Kenmore 10644022603 Refrigerator
Kenmore 10644023600 Refrigerator
Kenmore 10644023601 Refrigerator
Kenmore 10644023602 Refrigerator
Kenmore 10644023603 Refrigerator
Kenmore 10644024600 Refrigerator
Kenmore 10644029600 Refrigerator
Kenmore 10644029601 Refrigerator
Kenmore 10644029602 Refrigerator
Kenmore 10644029603 Refrigerator
Kenmore 10644032600 Refrigerator
Kenmore 10644032601 Refrigerator
Kenmore 10644032602 Refrigerator
Kenmore 10644032603 Refrigerator
Kenmore 10644033600 Refrigerator
Kenmore 10644033601 Refrigerator
Kenmore 10644033602 Refrigerator
Kenmore 10644033603 Refrigerator
Kenmore 10644034600 Refrigerator
Kenmore 10644039600 Refrigerator
Kenmore 10644039601 Refrigerator
Kenmore 10644039602 Refrigerator
Kenmore 10644039603 Refrigerator