Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Triple Water Valve
Works With Model GTWN3000M0WS!
$56.57
In Stock
- Fix Number:
- FIX11721803
- Manufacturer #:
- WH13X23974
- Manufactured by:
- GE
Works With Model GTWN3000M0WS!
- Product Description
- The triple water valve or inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually.
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# WH13X23974 replaces these:
- AP5985821, WH13X10048
Part Number Cross Reference
Product Description
The triple water valve or inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# WH13X23974 replaces these:AP5985821, WH13X10048
Videos For installing this part.
Replacing your Triple Water Valve
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Bruce from Kansas City, MO
- Parts Used:
- WH13X23974
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
water was dripping into the tub after the washer was finished with cycle
Removed the 3 screws off top back panel. Then pushed top control panel forward and removed 2 screws that secured the tripler water valve. Used pliers to remove hose clamp and removed hose with flat screwdriver, then removed old valve. Then reinstalled new valve in reverse order and reinstalled top panel back in place.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from Fort Myers, FL
- Parts Used:
- WH13X23974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Water was dripping into washing machine after the wash was done
Opened the back of the washing machine with a nut driver, three screws holding the back plate on. Unpluged hot and cold connection. Removed two screws and removed the water valve. Replaced it with the new one and everything works fine.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from Odessa, TX
- Parts Used:
- WH13X23974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Socket set
Triple water valve was clogged on the cold water inlet.
I first watched a very helpful UTube video on how to replace this valve. I unplugged washer and removed water lines. I had to remove the bolts on the upper side of the back panel and removed the front panel with all the knobs. I then unplugged the red and blue plugs. I unscrewed two screws anchoring original valve. Removed valve. I the
... Read more
n took the new valve and placed it in the same position as previous valve. Tightened two bolts and then plugged red and blue plugs. Put the cover panel back on and tightened the bolts on the back panel. Put cold and hot water lines back on. Plugged machine back in.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11721803
Manufacturer Part Number: WH13X23974
Manufacturer Part Number: WH13X23974
Brand
Model Number
Description
✖
Mail-In Recycling Rebate