MAGNETRON

Hardest part is removing and remounting the microwave. After removing the unit from the wall over the rooftop and taking to a backbench, remove the multiple screws holding the shell around the top and sides. Use parts manual to locate the magnetron on the right side, noting how the four wires are attached, remove thermostat on the right s ... Read more ide of the magnetron with wires attached by removing the two screws,remove the air vent along the backside of the magnetron, four screws, then remove the two wires to the magnetron, then the four screws holding the magnetron. Get the new magnetron and install in reverse order. Attach shell by two screws then test microwave oven with a cup of coffee, it should come to a boil in one minute not just warm, if that fixed the problem replace the rest of the screws holding the shell on and your finished.

Replaced magnetron