Bellow Kit

I had no trouble removing the Bellows ,used a small slot screwdriver to remove the "spring clamp" from the front edge of the bellows where the door shuts, and peeled the front part of the bellows from the face of the washer then pulling down wards and into the "drum" at he top it peeled the rubber along with the spring holding it in pla ... Read more ce , after having some difficulty in installing the "Bellows" to the drum and then turning the part that connects to the outside of the washer is rolled to the inside of the drum,to allow installing the spring in the grove at the back side of the Bellows. after attempting several times to use the "spring spacers" or holders several time found the instructions very vague on this matter and gave up that idea and had a friend hold the spring in the grove at about 11 0clock and I began "clockwise " placing the spring into the grove and stretching it some as I progressed clockwise tile the spring was installed