Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Bellow Kit
$275.79
In Stock
- Fix Number:
- FIX1156757
- Manufacturer #:
- 134728400
- Manufactured by:
- Frigidaire
- Product Description
- Also known as a Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle and to prevent water from leaking. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
- Works with the following brands:
- Frigidaire, Electrolux, Crosley
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking
- Part# 134728400 replaces these:
- AP3886970, 1191288, 134603700, 134739800
Part Number Cross Reference
Product Description
Also known as a Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle and to prevent water from leaking. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
-
Works with the following brands:Frigidaire, Electrolux, Crosley
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking
-
Part# 134728400 replaces these:AP3886970, 1191288, 134603700, 134739800
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Charles from Mabank, TX
- Parts Used:
- 134728400
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
replacing the bellows with the instructions provided
I had no trouble removing the Bellows ,used a small slot screwdriver to remove the "spring clamp" from the front edge of the bellows where the door shuts, and peeled the front part of the bellows from the face of the washer then pulling down wards and into the "drum" at he top it peeled the rubber along with the spring holding it in pla
... Read more
ce , after having some difficulty in installing the "Bellows" to the drum and then turning the part that connects to the outside of the washer is rolled to the inside of the drum,to allow installing the spring in the grove at the back side of the Bellows. after attempting several times to use the "spring spacers" or holders several time found the instructions very vague on this matter and gave up that idea and had a friend hold the spring in the grove at about 11 0clock and I began "clockwise " placing the spring into the grove and stretching it some as I progressed clockwise tile the spring was installed
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1156757
Manufacturer Part Number: 134728400
Manufacturer Part Number: 134728400
Brand
Model Number
Description
✖
Mail-In Recycling Rebate