10416158-1-M-Metabo-316031210-Fan W. Prot. Grid
Part Location Diagram of 316031210 Metabo Fan W. Prot. Grid
See part 14 in the diagram
( Grid squares measure 1x1 inch )
10416158-1-S-Metabo-316031210-Fan W. Prot. Grid 10416158-2-S-Metabo-316031210-Fan W. Prot. Grid 10416158-3-S-Metabo-316031210-Fan W. Prot. Grid Part Location Diagram of 316031210 Metabo Fan W. Prot. Grid

Fan W. Prot. Grid 316031210

Rated by 1 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$14.16
In Stock
Fix Number:
FIX10416158
Manufacturer #:
316031210
Manufactured by:
Metabo

Jump to:

Product Description

This is a genuine OEM sourced component which is specially designed for use with Metabo grinders. This is the main fan which connects to the motor and it is what moves the air, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality fan is made of durable plastic and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

  • Works with the following brands:
    Metabo, Metabo HPT
  • Works with the following products:
    Angle Grinder, Belt or Drum Sander, Miscellaneous
  • Part# 316031210 replaces these:
    316031210
Works with the following brands:
Metabo, Metabo HPT
Works with the following products
Angle Grinder, Belt or Drum Sander, Miscellaneous
Part Number Cross Reference
Part# 316031210 replaces these:
316031210

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$20.71
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Victor from Weston, CO
Parts Used:
344130840, 343373670, 339150880, 316031210, 314000970
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
My angle grinder, after years of hard use made a popping sound and started to vibrate slightly. I noticed some black plastic protruding from one of the motor vent slots in the head of tje grinder. Turned out to be a chunk of the motor cooling fan assembly.
After disconnecting from power, I disassembled the grinder to figure out what was broken, checking all parts as I went along. Disassembly is pretty straight forward, starting by removing the grinding wheel, nut, shield and side handle. Remove the 4 screws and the cover of the bevel gear housing. A 9mm wrench is used to remove the pinion g ear nut, to allow seperation of the motor armature from the gear housing. Before pulling the armature from the handle assembly, you can remove the side covers from the handle assembly and gently pull the brush retainers out of the handle/ motor frame to allow clearance. All parts were fine other than the motor cooling fan that had lost a 5/8" chunk of fin section. The air baffle and cover were still useable but slightly abraded by the fan parts, so I ordered those as well, being inexpensive anyway. The motor brushes were still about 70%, and all bearings were in excellent condition. The only other issue was that the bevel gear lubricant was pretty dried out, so I ordered a tube of that also.
Once my parts arrived I reassembled the grinder- the fan assembly pressed on the armature assembly with hand pressure- just be sure to align the splines. The cover, baffle, and bearing were easily tapped on the motor shaft using a small deep socket to push only on the bearings inner race. The pinion gear then pressed on the same way, then is retained by the 9mm nut. The armature can then be put back into the handle housing, the brush retainers put back in place, and the side covers reinstalled. The bevel gear housing can be pressed onto the armature/ bearing with hand pressure, perhaps with some light tapping with a padded hammer. The gear housing was re- greased with new lube ( it was cleaned while disassembled) and the gear cover/seal/ 4 screws replaced. The wheel guard was a bit tweaked from being used for 15 years, so I straightened that out before replacing it. I purchased an anti- vibe side handle for the old grinder too, as the original plastic handle was getting a bit beat up. In short, a fairly easy and inexpensive repair of an excellent tool. All the parts received from fix.com fit perfectly and were top quality. Hopefully I'll get another 15 years use out of this tool.
Read less
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX10416158
Manufacturer Part Number: 316031210
Brand Model Number Description
Metabo HPT BFE9-90 Belt or Drum Sander - Gb 110v
Metabo HPT KNSE12-150 Belt or Drum Sander - Ch 230v
Metabo HPT MFE30 Miscellaneous - Eu 230v
Metabo PE12-175 Sander Polisher - Polisher
Metabo RBE12-180 Sander Polisher - 7-Inch Pipe/Tube Sander
Metabo SE12-115 Sander Polisher - 1200 W Burnishing Machine
Metabo W10-125Quick Angle Grinder - 1010W Angle Grinder
Metabo W10-150Quick Angle Grinder - 1010W Angle Grinder
Metabo W7-115 Angle Grinder - 750W Angle Grinder
Metabo W7-115Quick Angle Grinder - 750W Angle Grinder
Metabo W7-125 Angle Grinder - 750W Angle Grinder
Metabo W7-125Quick Angle Grinder - 750W Angle Grinder
Metabo WE14-125Plus Angle Grinder - 1400W Angle Grinder
Metabo WE14-125VS Angle Grinder - 1400W Angle Grinder
Metabo WE14-150Plus Angle Grinder - 1400W Angle Grinder
Metabo WE14-150Quick Angle Grinder - 1400W Angle Grinder
Metabo WE9-125Quick Angle Grinder - 950W Angle Grinder
Metabo WEP14-125Quick Angle Grinder - 1400W Angle Grinder
Metabo WEP14-150Quick Angle Grinder - 1400W Angle Grinder
Metabo HPT WEP14-150QuickProtect Angle Grinder - 1400 Watt Angle Grinder
Metabo WP7-115Quick Angle Grinder - 900 W Angle Grinder
Metabo WP7-125Quick Angle Grinder - 750W Angle Grinder
Metabo WPS7-115Quick Angle Grinder - 750W Angle Grinder
Metabo WPS7-125Quick Angle Grinder - 750W Angle Grinder
Metabo HPT WQ10-125PLUS Angle Grinder - Eu 230v
Metabo HPT WQ1000 Angle Grinder - Non Eu 230v
Fan W. Prot. Grid
$ 14.16
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.