Pipe And Valve, Set Of 2 SS-201577
$6.51
Special Order
- Fix Number:
- FIX10406913
- Manufacturer #:
- SS-201577
- Manufactured by:
- Krups
Jump to:
Product Description
This is a genuine Krups replacement part. The pipe and valve set is designed by the manufacturer for use in coffee makers. This part includes a rubber pipe and a valve, which are used to control the flow of water through the machine. You may require a screwdriver and pliers when replacing these items.
-
Works with the following brands:Krups
-
Works with the following products:Coffee Maker
- Works with the following brands:
- Krups
- Works with the following products
- Coffee Maker
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Andrew from Los Gatos, CA
- Parts Used:
- SS-201577
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Coffee machine thinks its finished before it's started, or stops halfway through.
Unplug it, remove the coffee jug. Turn it upside down. Undo all the screws in the base and lift off the base. There are two orange tubes. The water feed pipe is the one with a valve in the middle. If you squeeze both pipes, you fill find one is rigid in the middle.
Pull that pipe off the plastic water feed tube. Squeeze the w ... Read more ire clamp that holds the other end of the tube to the heating spiral and slide it away from the pipe. Pull the pipe off the heating spiral. Blow down the new tube from both ends to figure out which way the valve operates. Install the tube with the new valve so that the water flows from the water tank into the heater spiral and cannot return back from the spiral into the tank.
Put the retaining clip back over the new tube. Close up the base. Screw the screws back in. Order your next part ... this will gum up again in 6 months or so, but the replacements are cheap, so order many of them! It's a 5-minute job to replace.
Pull that pipe off the plastic water feed tube. Squeeze the w ... Read more ire clamp that holds the other end of the tube to the heating spiral and slide it away from the pipe. Pull the pipe off the heating spiral. Blow down the new tube from both ends to figure out which way the valve operates. Install the tube with the new valve so that the water flows from the water tank into the heater spiral and cannot return back from the spiral into the tank.
Put the retaining clip back over the new tube. Close up the base. Screw the screws back in. Order your next part ... this will gum up again in 6 months or so, but the replacements are cheap, so order many of them! It's a 5-minute job to replace.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX10406913
Manufacturer Part Number: SS-201577
Manufacturer Part Number: SS-201577
| Brand | Model Number | Description |
|---|---|---|
| Krups | KM30D503DA | Coffee Maker - Coffee Maker |
| Krups | KM730D50/3DA | Coffee Maker - Coffee Maker |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.