This power cord is used for power tools and some of the following tools: electric drills, reciprocating saws, jig saws, biscuit joiners, and routers. The power cord is made for double insulated tools and is a two-wire cord with two prongs, but it does not need a ground wire. If there are cuts in the cord insulation, intermittent power during operation, or damaged and bent prongs, then replacing the power cord will solve the problem. The tools needed for this repair are a Phillips screwdriver, small screwdriver, wire cutters/strippers, crimping tool, and terminal (ring or spade). Repair tip: During installation, remember that new cord wires must go correctly into wire terminals. Also, to avoid pinching when the tool case is put back into place, remember to route cord and wires in the right path.
Videos For installing this part.
Replacing your Power Cord
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Installation Instructions Provided by Fix customers like you.
Customer:John from Hancock, MI
Difficulty Level:Very Easy
Total Repair Time:Less than 15 mins
Manufacturer Part Number: 330072-98