Part Location Diagram of 330005-01 DeWALT Electric Drill Cord Protector
See part 13 in the diagram
Replacing your DeWALT Electric Drill Electric Drill Cord Protector
( Grid squares measure 1x1 inch )

Electric Drill Cord Protector 330005-01

Rated by 2 customers 

?

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$7.97
In Stock
Fix Number:
FIX10169655
Manufacturer #:
330005-01
Manufactured by:
DeWALT

Product Description

This is a cord protector, but it is also called a strain relief, and it is used with multiple power tools. This part is made of firm rubber to protect the cords from being pulled out or exposed, which would be a safety hazard. Over time the strain relief can develop cracks and break into pieces. This part is black and 4 inches long. The smallest end has a diameter of 0.5 inches. When completing this repair tuck in all wires to avoid pinching.

Videos For installing this part.

Replacing your Electric Drill Cord Protector

Replacing your Electric Drill Cord Protector

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
John from SPRINGVILLE, CA
Parts Used:
464228-00, 330073-98, 330005-01
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Old worn cord shorting out.
Remove the four screws and carefully separate the casing at the trigger handle. Disconnect the terminals by lifting the switch slightly, just enough to remove the inside terminal. Needle nose pliers will make it easier to remove the terminals. Slip the cord protector over the new cord. Cut the two new wires to the proper length. I measure d the old connectors for proper fit. Strip a half inch off the insulation, carefully crimp and solder the wires to each terminal, reconnect the terminals, reposition the cord protector, align and snap the casing back together, and replace the four screws. Plug it in and test for proper operation.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Hancock, MI
Parts Used:
450892-03, 330072-98, 330005-01, 150428-00SV, 682505-8, 682502-4, 664064-4, 651128-3, 421279-4, 256615-3, 191214-3, 122768-9
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Did not come with grinding disc guard
While unit was unplugged I screwed clamp of guard around grinder.
6 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX10169655
Manufacturer Part Number: 330005-01
Brand Model Number Description
Black and Decker 1042 Electric Drill - 1/4 Holgun 120 Volt
Black and Decker 1046 Electric Drill - 1/4 Variable Speed Reversible Holgun
Black and Decker 1046-90 Electric Drill - Kett Power Unit 18 Gallons
Black and Decker 1065 Electric Drill - 1/4 Drill 120 Volt
Black and Decker 110 Electric Drill - Spade Handle Drill
Black and Decker 1161-44 Boring Machine - Ss 10mm Drill Chile
Black and Decker 1162-36 Boring Machine - 10mm Drill
Black and Decker 1164-36 Electric Drill - Electric Drill
Black and Decker 1165 Electric Drill - Professional 3/8 Shorty Drill
Black and Decker 1165-44 Electric Drill - 3/8 H.D. Shorty Drill
Black and Decker 1166 Electric Drill - 3/8 Variable Speed Reversible Drill
Black and Decker 1166-220 Boring Machine - 220v 3/8 Drill
Black and Decker 1166-36 Electric Drill - Vsr. Prof. Drill
Black and Decker 1166-44 Boring Machine - Vsr Prof. Drill
Black and Decker 1166-BDK Boring Machine - 3/8in Vsr Drill
Black and Decker 1167 Electric Drill - 3/8 Variable Speed Reversible Drill Keyless
Black and Decker 1170 Electric Drill - Variable Speed Reversible Drill 115 Volt
Black and Decker 1170-10 Electric Drill - 3/8 VR/HD/DI Drill
Black and Decker 1170-BDK Electric Drill - 3/8in Dual-Rnge Hlgn
Black and Decker 1172-10 Electric Drill - 3/8 VR/HD/DI Holgun 120 Volt
Black and Decker 1175 Electric Drill - 3/8 Holgun
Black and Decker 1179 Electric Drill - 3/8 Holgun
Black and Decker 1180 Electric Drill - 3/8 HD Variable Speed Reversible Holgun
Black and Decker 1180-09 Electric Drill - 3/8 HD Holgun 3 Wire
Black and Decker 1180-1 Electric Drill - 3/8 Variable Speed Reversible Drill
Black and Decker 1180-220 Electric Drill - 220v 3/8 Holgun
Black and Decker 1180-95 Electric Drill - 3/8 Drill
Black and Decker 1180G Electric Drill - 3/8 Holgun 3 Wire
Black and Decker 1187 Electric Drill - 3/8 HD Keyless Chuck Drill
Black and Decker 1301 Electric Drill - Drill