Watch the install video
2200270-1-M-Whirlpool-Y303836-Blower Wheel with Clamp
Part Location Diagram of Y303836 Whirlpool Blower Wheel with Clamp
See part 17 in the diagram
Replacing your Maytag Dryer Blower Wheel with Clamp
2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clamp 360 view
( Grid squares measure 1x1 inch )
2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clamp 2200270-2-S-Whirlpool-Y303836-Blower Wheel with Clamp 2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clamp 360 view
Part Location Diagram of Y303836 Whirlpool Blower Wheel with Clamp Replacing your Maytag Dryer Blower Wheel with Clamp

Blower Wheel with Clamp Y303836

★★★★★
★★★★★
4 Reviews

Rated by 30 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$22.86
In Stock
Fix Number:
FIX2200270
Manufacturer #:
Y303836
Manufactured by:
Whirlpool

Jump to:

Product Description

The blower wheel is responsible for blowing heat into the dryer drum, and out of the exhaust vent. If you notice that your dryer is taking too long to dry or is make unusually loud noises, it may be time to replace the blower wheel. This genuine OEM replacement part comes with a metallic clamp that holds the wheel in place. This part attaches to the drive motor shaft and can be accessed by removing the front panel of the dryer. Be sure to disconnect the power supply before beginning this repair.

  • Works with the following brands:
    Maytag, Jenn-Air, International
  • Works with the following products:
    Dryer, Washer Dryer Combo
  • Fixes the following symptoms:
    Noisy, Too hot
  • Part# Y303836 replaces these:
    AP4294048, 1245880, Y303836, 3-12913, 3-3836, 303836 , 312913, Y303836, Y312913 Show less
Works with the following brands:
Maytag, Jenn-Air, International
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Noisy, Too hot
Part Number Cross Reference
Part# Y303836 replaces these:
AP4294048, 1245880, Y303836, 3-12913, 3-3836, 303836, 312913, Y303836, Y312913

Videos For installing this part.

Replacing your Blower Wheel with Clamp

Replacing your Blower Wheel with Clamp

Questions and Answers

Be the first to ask our experts a question about this part!

Tumbler and Motor Belt
★★★★★
★★★★★
(9)
$32.39
In Stock
Part Number: FIX11757542
This is a single OEM dryer drum belt. It measures 100 inches in length, 3/8 of an inch wide and has five ribs and four grooves. Keep in mind that this rubber drum belt will stretch over time, so if you are comparing your...
Retaining Ring
$7.87
In Stock
Part Number: FIX11746909
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or ...
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Produce Preserver Filter
$21.50
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Cooktop Cleaning Cream
$15.57
In Stock
Part Number: FIX12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Cooktop Cleaner
$17.74
In Stock
Part Number: FIX3492527
Sold individually.
Affresh Cleaner
$19.09
In Stock
Part Number: FIX2367638
There are 6 tablets in each package and it is suggested to use every month. These keep the dishwasher fresh by dissolving and removing odor.
View More View Less
Tumbler and Motor Belt
$32.39
In Stock
Part Number: FIX11757542
Retaining Ring
$7.87
In Stock
Part Number: FIX11746909
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Part Number: FIX1960673
Produce Preserver Filter
$21.50
In Stock
Part Number: FIX3503014
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Part Number: FIX12345667
Cooktop Cleaning Cream
$15.57
In Stock
Part Number: FIX12717774
Cooktop Cleaner
$17.74
In Stock
Part Number: FIX3492527
Affresh Cleaner
$19.09
In Stock
Part Number: FIX2367638

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 30 reviews.
  • 1
  • 2
  • 3
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
ROBERT from RUMSON, NJ
Parts Used:
W10410999, WPY312959, Y303836
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
The motor died on my 38 year old Maytag dryer.
Because of the New Year's Holiday, it took 6 days to get the 2-3 business day ordered parts. I disassembled the dryer and cleaned it as I went. During disassembly, the blower wheel fell apart when the retaining clamp was removed. When the drum was out, I had good access to the motor which did not move when I tried to turn the shaft. I then ordered the parts and waited for 6 days. The new motor electrical connections were different from the original motor but the proper crimp terminals were provided with the motor and the connection instructions were clear. Assembling the belt required an internet search to determine the correct side of the belt to the drum. The instructions said smooth side to the drum, but the belt had a rubbery grooved side and a flat brought side. I confirmed from an internet search that the "smooth" side in the instructions meant the rough side of the belt. If you do this job make sure that you have a crimper for the wire terminals and a ring clip pliers for the two ring clips that hold the blower wheel in place.
Read less
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Erik from Belvedere, CA
Parts Used:
Y303836
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Noisy 'rattling' sounds from Dryer ->bad blower fan wheel
Watched the video - really helped me get prepared. Very simple repair: first, unplug power! Removed front panel 2 screws & slowly pulled panel outward to release top clips (2min). At unit bottom, removed the blower fan grey cover (7 screws, 3min). Pulled spring washer (careful not to bend) from shaft and removed spring clip on blower f an wheel (5 min). Installed new blower fan wheel onto shaft with washer&clip. Reinstalled blower cover/screws and front panel/screws. Total time about 15min. Thanks for an easy, inexpensive fix!
Read less
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ethan from PENFIELD, NY
Parts Used:
Y303836
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Loud vibrations/sounds during operation, Blower fan had worn a out the "D" shaft hole.
Step 1: Unplug dryer
Step 2: Using a stubby Phillips head screw driver remove the 2 screws on the bottom of the front cover on the dryer.
Step 3: Lift panel up and out until the clips disconnect from the top plate.
Step 4: Carefully pivot and swing the panel to the left side leaving wires connected.
Step 5: Rem ove 1/4 grounding screw from left of the lint trap assembly.
Step 6: Remove lint trap assembly 4 1/4" screws from the inside of the dryer holding it, put it to the side.
Step 7: Remove the 6 1/4" screws from blower fan cover.
Step 8: Remove 9/16" screw holding the cover to the bottom panel and carefully pull cover out of the way leaving wires
connected.
Step 9: Using cir-clip pliers remove the cir-clip form the motor shaft.
Step 10: Using normal pliers squeeze metal clamp and remove from blower fan.
Step 11: Clean out the lint from the area.
Step 12: Remove blower fan and replace.
Step 13: Install blower fan on the motor shaft and install the cir-clip and clamp.
Step 14: Reassembly fan cover, lint trap assembly, ground wire and front panel. Have the front panel sung outward to get the top
clips into position.
Read less
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stan from Pinckney, MI
Parts Used:
Y303836
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Dryer rumbling could be mistaken for worn drum rollers.
To differentiate turn drum and stop it by hand. If rumble continues dryer fan is spinning on axle due to plastic hub worn out.Remove angled front panel with Phillips screwdriver. Inspect fan blower mounted to axle. If it wobbles or spins replace it. Remove fan cover with nut driver. Remove clip holding fan to axle. Replace fan assuring flat matches axle. Replace retainer clip. Replace fan cover. Replace front panel. Test.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Orrin from La Canada, CA
Parts Used:
WPY312959, Y303836, WP314820, 306508
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Dryer makes horrible noise but drum still turns.
The old dilemma is whether to fix a >20y/o dryer, or just buy a new one. With minimal effort, it was easy to find the source of the noise by manually turning the drum. Noise in the front turned out to be the blower wheel which is located right in the front of the dryer. Removing about 6 screws shows the motor shaft wore out the plastic ce nter of the blower wheel and so the blower wheel was not spinning properly and bouncing around in the housing. Typing in the Model # in PartSelect.com gave me the whole diagram and exactly what to order. Since I had the dryer apart anyway, I decided to go ahead and replace the felt seals and drum/motor belt and front glides. Easy instructions to do all of this is available on multiple YouTube videos. The only caveat is some of these items are held in w/ snap rings. It's possible to deal with snap rings using a small screwdriver and pliers but having special snap ring pliers makes this step a whole lot easier. In my case the drum support rollers and belt tensioner roller turned out to be fine and only needed some lubrication. Also, in this particular model, the felt seals are held on w/ sheet metal tabs and do not require the expensive heat resistant glue. All parts installed, dryer back together and works perfectly on the very first try! Saved me a ton of money and the wife is happy, thanks to this site!
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
R. from Billings, MT
Parts Used:
WPY312959, Y303836, WP9703438
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Blower wheel slipping on shaft
watched a Youtube video how to open the dryer, located the problem, ordered parts, replaced, closed up the machine and drank a beer.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
KHANH from Seattle, WA
Parts Used:
Y303836, WP9703438
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Makes Noise
Remove 2 screws under front Panel and take the front panel out. Then remove 4 screws and then remove the support drum panel out. Remove old blower. and replace the new one. Continue with reverse above steps.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Dyess AFB, TX
Parts Used:
Y303836, 12001541
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The blower broke and was making noise.
Followed instructions on the videos.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from Kansas City, MO
Parts Used:
Y303836, 33001623
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Buzzer had stopped working & noise from the blower fan that had been whoppling loosely on motor shaft..
1.Unplugged electric dryer.
2.Removed screws from back of control panel to gain entry to remove buzzer switch.
3.As I removed wires from old switch I placed them onto the new switch.
4.Then I removed the one screw that held the buzzer switch in place & replaced with the new buzzer switch.
5.I had removed the blower fan days earlier when I ordered parts from you. So I greased the shaft with lithium grease.
6.Placed new blower fan onto shaft of motor.
7.Then using the snap ring pliers placed the snap ring onto shaft of motor.
8.Then using pliers I placed the clamp onto the blower fan.
9.Plugged up the dryer, then set dryer on a short cycle to see if buzzer worked like it should. It worked.
10. I also was instantly able to notice how quiet the dryer was with the new blower fan on it. Dryer was quiet when working.
11.Dryer worked as well as it did 19 years ago when first purchased.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doug from Southbury, CT
Parts Used:
Y303836
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
dryer very noisy, blower fan had a lot of play in it
Basically followed the video supplied by web site. Very helpful. I bought the retaining ring pliers which made the job easier. Installed the blower fan with ease and saved a lot of money.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
★ Customer Reviews
Average Rating: (4 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5★
    4
  • 4★
    0
  • 3★
    0
  • 2★
    0
  • 1★
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cris C - 12 days ago
Verified Purchase
Bad blower no more
Looks good and works good also.
★★★★★
★★★★★
Ray N - July 9, 2023
Verified Purchase
Perfect fit, quality OEM part at a very reasonable price
This part is exactly what was needed to breathe new life into my aged Maytag stack washer-dryer. My dryer had started making noise, and was not drying - google research pointed to this as the most likely part to have failed, and indeed it was. A relatively easy repair - just requires keeping things organized and in order. Hardest part was the split ring removal and replacement on the wheel (I don't own a spring-clip pliers), but I was able to complete the repair with normal hand tools. I did the entire repair with the washer in place - just turned off the electrical breaker. Most repair videos I found dealt with the standalone dryer, but I finally found one about the stacking dryer on YouTube channel KevReviews that was helpful in performing the repair: https://www.youtube.com/watch?v=PvH-_NJx3D0
★★★★★
★★★★★
Thomas S - August 18, 2021
Verified Purchase
Perfect fit
Same as original part. Delivered fast. Dryer quiet and working again.
★★★★★
★★★★★
David C - March 21, 2020
Verified Purchase
Exact part
Quick delivery as stated, fit perfect/

Model Compatibility

This part works with the following models:
Fix Number: FIX2200270
Manufacturer Part Number: Y303836
Brand
Model Number
Description
Maytag
DE106
Dryer - Electric
Maytag
DE107
Dryer - Electric
Maytag
DE110
Dryer - Electric
Maytag
DE180
Dryer - Maytag Dryer Model DE180 Parts
Maytag
DE18CA
Dryer - Electric
Maytag
DE18CM
Dryer - Electric
Maytag
DE18CS
Dryer - Electric
Maytag
DE18CT
Dryer - Electric
Maytag
DE19CA
Dryer - Electric
Maytag
DE19CD
Dryer - Electric
Maytag
DE19CS
Dryer - Electric
Maytag
DE19CT
Dryer - Electric
Maytag
DE210
Dryer - Electric
Maytag
DE212
Dryer - Residential
Maytag
DE21CA
Dryer - Electric
Maytag
DE21CM
Dryer - Electric
Maytag
DE21CS
Dryer - Electric
Maytag
DE21CT
Dryer - Electric
Maytag
DE22CA
Dryer - Electric
Maytag
DE22CS
Dryer - Electric
Maytag
DE22CT
Dryer - Electric
Maytag
DE23CD
Dryer - Electric
Maytag
DE24CA
Dryer - Electric
Maytag
DE24CM
Dryer - Electric
Maytag
DE24CS
Dryer - Electric
Maytag
DE24CT
Dryer - Electric
Maytag
DE25CS
Dryer - Electric
Maytag
DE26CA
Dryer - Commercial
Maytag
DE26CD
Dryer - Commercial
Maytag
DE26CS
Dryer - Electric
Blower Wheel with Clamp
$ 22.86
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.