OEM Maytag Dryer Blower Wheel with Clamp [Y303836] | Ships Today | Fix.com
Blower Wheel with Clamp – Part Number: Y303836
( Grid squares measure 1x1 inch )
Blower Wheel with Clamp – Part Number: Y303836 Blower Wheel with Clamp – Part Number: Y303836 Blower Wheel with Clamp – Part Number: Y303836 https://fixcom.azureedge.net/Schematics/Maytag/36762.gif

Blower Wheel with Clamp

1 Review
Your Price
$20.80

Fix Number: FIX2200270

Manufacturer #: Y303836

Manufactured by: Whirlpool

Part description

This blower wheel comes with a metallic hub clamp to hold it firmly in place.

Works with the following brands

Maytag, Jenn-Air, International

Works with the following products

Dryer, Washer Dryer Combo

Fixes the following symptoms

Noisy | Takes too long to dry | No heat or not enough heat | Will not tumble

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
Part Number: FIX11740752
This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.
$8.20
In Stock
(6)
Part Number: FIX11757542
At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. This belt is all black in color and is made entirely of rubber.
$19.15
In Stock

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 3.3 / 5.0, 30 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ethan from PENFIELD, NY
Parts Used:
Y303836
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Loud vibrations/sounds during operation, Blower fan had worn a out the "D" shaft hole.
Step 1: Unplug dryer
Step 2: Using a stubby Phillips head screw driver remove the 2 screws on the bottom of the front cover on the dryer.
Step 3: Lift panel up and out until the clips disconnect from the top plate.
Step 4: Carefully pivot and swing the panel to the left side leaving wires connected.
Step 5: Remove 1/4 grounding screw from left of the lint trap assembly.
Step 6: Remove lint trap assembly 4 1/4" screws from the inside of the dryer holding it, put it to the side.
Step 7: Remove the 6 1/4" screws from blower fan cover.
Step 8: Remove 9/16" screw holding the cover to the bottom panel and carefully pull cover out of the way leaving wires
connected.
Step 9: Using cir-clip pliers remove the cir-clip form the motor shaft.
Step 10: Using normal pliers squeeze metal clamp and remove from blower fan.
Step 11: Clean out the lint from the area.
Step 12: Remove blower fan and replace.
Step 13: Install blower fan on the motor shaft and install the cir-clip and clamp.
Step 14: Reassembly fan cover, lint trap assembly, ground wire and front panel. Have the front panel sung outward to get the top
clips into position.
4 of 4 people found this instruction helpful.
Were these instructions helpful?
Customer:
Erik from Belvedere, CA
Parts Used:
Y303836
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Noisy 'rattling' sounds from Dryer ->bad blower fan wheel
Watched the video - really helped me get prepared. Very simple repair: first, unplug power! Removed front panel 2 screws & slowly pulled panel outward to release top clips (2min). At unit bottom, removed the blower fan grey cover (7 screws, 3min). Pulled spring washer (careful not to bend) from shaft and removed spring clip on blower fan wheel (5 min). Installed new blower fan wheel onto shaft with washer&clip. Reinstalled blower cover/screws and front panel/screws. Total time about 15min. Thanks for an easy, inexpensive fix!
3 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
Stan from Pinckney, MI
Parts Used:
Y303836
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Dryer rumbling could be mistaken for worn drum rollers.
To differentiate turn drum and stop it by hand. If rumble continues dryer fan is spinning on axle due to plastic hub worn out.Remove angled front panel with Phillips screwdriver. Inspect fan blower mounted to axle. If it wobbles or spins replace it. Remove fan cover with nut driver. Remove clip holding fan to axle. Replace fan assuring flat matches axle. Replace retainer clip. Replace fan cover. Replace front panel. Test.
2 of 2 people found this instruction helpful.
Were these instructions helpful?
Customer:
R. from Billings, MT
Parts Used:
WPY312959, Y303836, WP9703438
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Blower wheel slipping on shaft
watched a Youtube video how to open the dryer, located the problem, ordered parts, replaced, closed up the machine and drank a beer.
2 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
ROBERT from RUMSON, NJ
Parts Used:
W10410999, WPY312959, Y303836
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
The motor died on my 38 year old Maytag dryer.
Because of the New Year's Holiday, it took 6 days to get the 2-3 business day ordered parts. I disassembled the dryer and cleaned it as I went. During disassembly, the blower wheel fell apart when the retaining clamp was removed. When the drum was out, I had good access to the motor which did not move when I tried to turn the shaft. I then ordered the parts and waited for 6 days. The new motor electrical connections were different from the original motor but the proper crimp terminals were provided with the motor and the connection instructions were clear. Assembling the belt required an internet search to determine the correct side of the belt to the drum. The instructions said smooth side to the drum, but the belt had a rubbery grooved side and a flat brought side. I confirmed from an internet search that the "smooth" side in the instructions meant the rough side of the belt. If you do this job make sure that you have a crimper for the wire terminals and a ring clip pliers for the two ring clips that hold the blower wheel in place.
2 of 4 people found this instruction helpful.
Were these instructions helpful?
Customer:
KHANH from Seattle, WA
Parts Used:
Y303836, WP9703438
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Makes Noise
Remove 2 screws under front Panel and take the front panel out. Then remove 4 screws and then remove the support drum panel out. Remove old blower. and replace the new one. Continue with reverse above steps.
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Michael from Dyess AFB, TX
Parts Used:
Y303836, 12001541
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The blower broke and was making noise.
Followed instructions on the videos.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Ronald from Kansas City, MO
Parts Used:
Y303836, 33001623
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Buzzer had stopped working & noise from the blower fan that had been whoppling loosely on motor shaft..
1.Unplugged electric dryer.
2.Removed screws from back of control panel to gain entry to remove buzzer switch.
3.As I removed wires from old switch I placed them onto the new switch.
4.Then I removed the one screw that held the buzzer switch in place & replaced with the new buzzer switch.
5.I had removed the blower fan days earlier when I ordered parts from you. So I greased the shaft with lithium grease.
6.Placed new blower fan onto shaft of motor.
7.Then using the snap ring pliers placed the snap ring onto shaft of motor.
8.Then using pliers I placed the clamp onto the blower fan.
9.Plugged up the dryer, then set dryer on a short cycle to see if buzzer worked like it should. It worked.
10. I also was instantly able to notice how quiet the dryer was with the new blower fan on it. Dryer was quiet when working.
11.Dryer worked as well as it did 19 years ago when first purchased.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Doug from Southbury, CT
Parts Used:
Y303836
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
dryer very noisy, blower fan had a lot of play in it
Basically followed the video supplied by web site. Very helpful. I bought the retaining ring pliers which made the job easier. Installed the blower fan with ease and saved a lot of money.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Ronald from Davie, FL
Parts Used:
Y303836
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Noisy blower wheel
Who knew a fan/blower wheel could cause such a racket. I thought it was the drum rollers. Bought new rollers and a belt because there was so much noise and vibration. Turns out one of the rollers was bad. But, it was the blower wheel that cause all the ruckus. The instructions are exactly like the online video. Remover the front cover by removing the two screws at the bottom of the panel. Use a nut driver to remove the front drum bracket (4 nuts). Then remove the blower wheel cover. After that, you're just removing the ring clip and the main clip. Slide the old fan off and then follow the process in reverse. Piece of cake and now I have silence in my house again. My 18 year old Maytag is ready for hopefully another 18 years. :-)
0 of 1 people found this instruction helpful.
Were these instructions helpful?

Customer Reviews

Average Rating (1 Reviews):
5
out of 5
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

This part works with the following models:

Fix Number: FIX2200270
Manufacturer Part Number: Y303836
Brand
Model Number
Description
Maytag
DE106
Dryer - Electric
Maytag
DE107
Dryer - Electric
Maytag
DE110
Dryer - Electric
Maytag
DE180
Dryer - Maytag Dryer Model DE180 Parts
Maytag
DE18CA
Dryer - Electric
Maytag
DE18CM
Dryer - Electric
Maytag
DE18CS
Dryer - Electric
Maytag
DE18CT
Dryer - Electric
Maytag
DE19CA
Dryer - Electric
Maytag
DE19CD
Dryer - Electric
Maytag
DE19CS
Dryer - Electric
Maytag
DE19CT
Dryer - Electric
Maytag
DE210
Dryer - Electric
Maytag
DE212
Dryer - Residential
Maytag
DE21CA
Dryer - Electric
Maytag
DE21CM
Dryer - Electric
Maytag
DE21CS
Dryer - Electric
Maytag
DE21CT
Dryer - Electric
Maytag
DE22CA
Dryer - Electric
Maytag
DE22CS
Dryer - Electric
Maytag
DE22CT
Dryer - Electric
Maytag
DE23CD
Dryer - Electric
Maytag
DE24CA
Dryer - Electric
Maytag
DE24CM
Dryer - Electric
Maytag
DE24CS
Dryer - Electric
Maytag
DE24CT
Dryer - Electric
Maytag
DE25CS
Dryer - Electric
Maytag
DE26CA
Dryer - Commercial
Maytag
DE26CD
Dryer - Commercial
Maytag
DE26CS
Dryer - Electric